圖書信息
陶瓷新型膠態成型工藝
定 價：￥120.00
庫 存：有貨，可送至全國作 者：黃勇，楊金龍著
出 版 社：清華大學出版社
出版時間：2010-7-1
開 本：32開
I S B N：9787302213246
內容簡介
本書系統、完整地介紹了清華大學黃勇科研組在過去20多年裡在高性能陶瓷成型工藝領域取得的研究成果，同時，還論述了其他國家學者近年來在陶瓷成型領域所取得的進展。本書內容分為7章，包括：基於凝膠體系的陶瓷膠態注射成型新工藝；陶瓷基片的凝膠流延工藝；無毒或低毒體系凝膠成型工藝；陶瓷製備過程中缺陷的產生、演化、遺傳和控制：非氧化物陶瓷凝膠注模成型新工藝；膠態成型工藝的套用；膠態成型工藝新方法和新技術。
目錄
Chapter 1 Aqueous Colloidal Injection Molding of Ceramics Based on Gelation
1.1 Colloidal Injection Molding
1.1.1 The Concept ofCIMC
1.1.2 The Flowchart of CIMC
1.1.3 The Machine of CIMC
1.2 Pressure Induced Forming
1.2.1 Effect ofhydrostaticPressure on Solidification
1.2.2homogeneityof the Green Bodies
1.2.3 Controlling the Inner Stress in the Green Body
1.3 Storage Stability of Ceramic Slurries
1.3.1 The Importance of Storage Stability of Slurry
1.3.2 Chemical Stability
1.3.3 Inhibitor for Slurry Storage
1.4 To Prepare High Reliability Ceramic Parts with Complex Shapes: Aqueous Colloidal Injection Molding
References
Chapter 2 Gel-Tape-Casting of Ceramic Substrates
2.1 Fundamental Principle and Processing of Aqueous Gel-Tape-Casting
2.1.1 Tape Casting Types and the Raw Materials
2.1.2 Polymerization of the Monomer
2.1.3 Influence Factors on Polymerization of the Monomer
2.1.4 Processing of the Gel-Tape-Casting
2.2 The Characteristics of Slurries Used for Aqueous Gel-Tape-Casting
2.2.1 The Properties of the Aqueous Ceramic Slurries with Binder
2.2.2 The Influence of Dispersants on Stability and Rheology of Aqueous Ceramic Slurries with Organic Monomer
2.2.3 The Influence ofplasticizeron Properties of Aqueous Ceramic Slurry with Organic Monomer
2.2.4 The Influence of pH on the Properties of Slurries with Organic Monomer
2.2.5 The Effect of Surfactant on Wetting and Green Tape Releasing (Separating)
2.2.6 Foam and Pore Elimination
2.2.7 Sintering of Green Tape Prepared by Slurry
2.3 Aqueous Gel-Tape-Casting with Styrene-Acrylic Latex Binder
2.3.1 The Importance of Binders in Gel-Tape-Casting Process
2.3.2 The Forming Film Mechanism of Latex Binder
2.3.3 Raheological Properties of the Alumina Slurries with Binder
2.3.4 The Physical Properties and Microstructure of Green Tapes with Latex Binder
2.4 A Gel-Tape-Casting Process Based on Gelation of Sodium Alginate
2.4.1 Why Study on Tape Casting of Sodium Alginate
2.4.2 The Preparation of Aqueous Alumina Suspensions with Sodium Alginate and Calcium Phosphere Tribasic
2.4.3 Control of the Gelation of Sodium Alginate
2.4.4 Characterization of Green Tapes
2.5 The Spray Trigger Fast-Curing for the Gel-Tape-Casting Process
2.5.1 The Idea of the Spray Trigger Fast-Curing
2.5.2 Outline of the New Process
2.6 The Features and Prospects of the Aqueous Tape-Casting
References
Chapter 3 Gelation Forming Process for Low Toxicity System
3.1 Gelation Forming of Ceramic Suspension with Agarose
3.1.1 Characteristics of Agarose
3.1.2 The Effect of Agarose Contents on the Rheology of Aqueous Ceramic Suspensions
3.1.3 The Forming Courses of the Aqueous Ceramic Suspensions with Agarose
3.2 Alumina Casting Based on Gelation ofgelatine
3.2.1 Characteristics of Gelatine
3.2.2 The Gelation Process of the Ceramic Slurry with Gelatine Solution
3.2.3 The Preparation of Green Body Using Slurry with Gelatine Solution
3.3 A Casting Forming for Ceramics by Gelatine and Enzyme Catalysis
3.3.1 Research Background
3.3.2 The Gelation Mechanism of Gelatine Solution with Urea under Enzyme Catalysis
3.3.3 The Rheology and Zeta Potential of Alumina Suspension Containing Gelatine and Urea
3.3.4 TheCoagulationForming and Microstructure of Green Body
3.4 The Alumina Forming Based on Gelation of Sodium Alginate
3.4.1 Research Background
3.4.2 The Gelation Principle of Sodium Alginate
3.4.3 The Preparation Process of Alumina Green Bodies and Samples by Sodium Alginate
3.5 The Gel-Casting of SiC Based on Gelation of Sodium Alginate
3.5.1 Introduction of the Research
3.5.2 The Effect of Dispersant on the Colloidal Behaviors of the SiC Suspension
3.5.3 The Rheological Property of SiC Suspension
3.5.4 The Sedimentation Behavior of the SiC Suspension
3.5.5 The Gelation Principle and Process of the Alginate Solution
3.5.6 The Gelation of the SiC Suspension with Alginate
3.6 The Alumina Gel-Casting with a Low-Toxicity System of HEMA
3.6.1 The Academic Idea and Research Program
3.6.2 The Colloidal Chemistry and Rheological Property
3.6.3 The Binder Burnout and Application of the New System
3.7 The Synergistic Low-Toxicity Gel-Casting System by Using HEMA and PVP
3.7.1 The Academic Idea and Research Program
3.7.2 Zeta Potentials and Rheological Properties
3.7.3 The Activation Energy and Solidification
3.7.4 The Green Strengths and Microstructures
3.7.5 The Exfoliation Elimination Effect and Analysis of the Interaction between PVP and HEMA Molecules
References
Chapter 4 Generation, Development,Inheritance, and Control of the Defects during the Transformation from Suspension to Green Body
4.1 The Rheological Behaviors of Aqueous Ceramic Suspensions
4.1.1 The R.heological Behaviors of Aqueous Alumina Suspensions
4.1.2 The Effect of Rheological Properties of Suspension on Mechanical Strength of Ceramics
4.1.3 The Effect of Solid Loading on Colloidal Forming
4.2 The Generation and Development of Defects
4.2.1 The Generation Mechanisms of Agglomerations in Ceramic Suspensions
4.2.2 TheInfluencesof Idle Time on Microstructures and Mechanical Properties of Green Bodies by Direct Coagulation Casting
4.3 The Effect of Ionicconductanceon Preparation of Highly Concentrated Suspension
4.3.1 The Academic Idea and Research Program
4.3.2 The Relationship Between Ion Conductivity Constants and Solid Loading
4.4 Control of Inner Stress in Green Body
4.4.1 Origin, Transformation and Control of Inner Stress in Green Body
4.4.2 The Release and Control of Inner Stresses in Ceramic Green Body
4.5 The Suppression of Surface-Exfoliation with the Addition of Organic Agents
4.5.1 The Suppression of Surface-Exfoliation by Introducing PAM into Monomer System in Suspension
4.5.2 The Suppression of Surface-Exfoliation by Introducing Polyethylene Glycol into Monomer System in Suspension
4.5.3 The Suppression of Surface-Exfoliation by Introducing Poly-vinylpyrrolidone (PVP) into Monomer System in Suspension
References
Chapter 5 The Gel-Casting of Non-Oxide Ceramics
5.1 The Effects of Powder Surface Modification on Concentrated Suspensions Properties of Si3N4
5.1.1 The Contributing Factor and Elimination of Macropores in Si3N4 Green Bodies
5.1.2 The Effect of Foreign Ions on Concentrated Suspension of Si3N4
5.1.3 The Effect ofacid cleaningand Calcinations on the Suspension Properties of Si3N4
5.1.4 The Effect of Liquid Medium and Surface Group on Dispersibility of Si3N4 Powder
5.2 The Gel-Casting of Si3N4 Ceramics
5.2.1 The Preparation of Si3N4 Ceramics with Surface-Coated Si3N4 Powder
5.2.2 The Preparation of Si3N4 Ceramics with Surface-Oxidized Si3N4 Powder
……
Chapter 6 Application of New Colloidal Forming
Chapter 7 The New Methods and Techniques Based on Gel-Casting
Appendix
Index of Terms
Index of Scholars
Postscript
