簡介
錐柱手柄，標準為JB/T 7270.7-1994
材料一般為35鋼、Q235A；表面處理方法有噴砂鍍鉻、鍍鉻拋光、氧化；分為A型錐柱手柄（直柄）和B型20°斜角錐柱手柄（俗稱：斜錐柱手柄）。
標記示例
A型，d=6，L=50，35鋼，噴砂鍍鉻錐柱手柄，標記為：手柄6x50 JB/T 7270.7
| d | d1 | s | L | SD | D1 | D2 | d2 | H | h | SR | 每件質量/Kg | ||
| 基本尺寸 | 極限偏差h8 | | 基本尺寸 | 極限偏差H13 | |||||||||
| 5 | +0.018 0 | M5 | | | 40 | 12 | 7 | 5 | 2 | 9 | 4.5 | 10 | 0.013 |
| 6 | M6 | 5 | +0.18 0 | 50 | 14 | 8 | 10 | 5 | 0.021 | ||||
| 8 | +0.022 0 | M8 | 5.5 | 63 | 16 | 10 | 6 | 3 | 11 | 12 | 0.037 | ||
| 10 | M10 | 7 | +0.22 0 | 80 | 20 | 12 | 8 | 14 | 6.5 | 16 | 0.068 | ||
| 12 | +0.027 0 | M12 | 8 | 10 | 26 | 15 | 10 | 4 | 18 | 8.5 | 20 | 0.127 | |
| 16 | M16 | 10 | 125 | 32 | 18 | 12 | 5 | 22 | 10 | 25 | 0.252 | ||
| 20 | +0.033 0 | M20 | 13 | +0.27 0 | 160 | 40 | 22 | 16 | 6 | 28 | 13 | 32 | 0.447 |
| 25 | M24 | 18 | 200 | 50 | 28 | 18 | 8 | 36 | 17 | 40 | 0.856 | ||
