鉸鏈帶式過濾器

operation strain spection

過濾器是從流體中分離固體顆粒雜質，提高產品純度，保護設備（壓縮機、泵、儀表等）安全工作的產品。
Filter is a kind of small equipment that eliminates a small mount of rounds from liquid. It can protect normal operation for compressor, pump and other equipment as well as instruments and is also a small equipment to increase product pureness and purify gas. Soit can be widely used in pertroleum and chemical fiber, medicine, food etc.
主要技術參數：
Main technical parameters：
適用的物料有：
Applicable medium：
化工、石油化生產中的弱腐蝕性物料，如：水、氨、油品、烴類等。
Weak corrosively medium for petrochemical production such as waterammoniaoil hydrocarbon products and etc.
化工生產品中的腐蝕性物料，如：燒鹼、純鹼、濃稀硫酸、碳酸、醋酸等。
Corrosively medium for chemical production such as sodium hydrate,caustic soda,sulfuric acid,nitric acid,acetic acid,fatty acid.
冷中的低溫物料，如：液甲烷、液氨、液氧和各種冷劑。
Low temperature medium for refrigeration, the refrigerant such as liquefied methane,liquefied ammonia,oxygen and etc.
輕工食品、製藥生產中有衛生要求的物料，如：啤酒、飲料、乳製品、糧漿醫藥用品等。
Industry hygiene medium in leightindustry,foodstuff and pharmacy such as beerdrinkbeverage dairy products,syrup medical articles for use and etc.
各種特殊工藝的高效精密過濾器等。
For va rious special behavior high efficiency fine filter.
工作溫度（℃）：碳鋼：-30~380℃，不鏽鋼：-80~450℃。
Operating Temperature (℃):CS:- -30~380℃，SS:-80~450℃。
工作壓力（MPa）：-0.6~5.0Mpa
Operating Pressure (Mpa): -0.6~5.0Mpa
殼體材質：A3、SS304、SS304L、SS316、SS316L、襯PP、H62等。
Body Material:A3、SS304、SS304L、SS316、SS316L、襯PP、H62 and so on.
密封材質：耐油石棉橡膠、丁睛橡膠、聚四氟乙烯。
Seal Material:Asbestos、NBR、PTFE
粗過濾濾芯材質：濾框、濾網均為不鏽鋼。
strainer Element Material:Sreen Mesh Material:ss
精過濾濾芯材質：鈦合金燒結濾芯、不鏽鋼摺疊濾芯、聚四氟摺疊濾芯、聚丙烯摺疊濾芯、金屬纖維燒結管氈、陶瓷。
Precision Filter Element Material:Sinter A1 Alloy Filter element、Fold Stainless filter element、Fold PTFE Filter element Fold HPPfilter element、Sintered metal Cotton Rayon filter element、Ceramic
法蘭標準：HG2059-97PN1.0當客戶需用GB、SH、HGJ、JB、ANSI、JIS或等標準或改變壓力等級時，請在訂貨契約中註明。
Flanges of the valve are in accordance with HG20594-97 PN1.0.When GB、SH、HGJ、JB、ANSI、JIS If changed,buyer shall illustrate in the contract.
製造、檢測標準：執行GB150標準。或客戶指定標準。
Code for manufacturing and inspection:GB150,or specified by buy