學習工作經歷
2004.09 - 2008.06西北工業大學材料科學與工程學院 工學學士
2008.09 - 2014.06西北工業大學 材料科學與工程學院 工學博士（碩博連讀）
2014.07 - 至今重慶大學 材料科學與工程學院 材料加工系 講師
主要研究方向
六方晶體結構金屬的塑性變形機制；
航空結構材料鈦合金的鍛造和熱處理。
科研項目
預變形對鈦合金兩相區冷卻過程中次生α相形核的影響；國家自然科學基金青年基金；2016.1~2018.12；負責人
1.預變形對鈦合金兩相區冷卻過程中次生α相形核的影響；國家自然科學基金青年基金；2016.1~2018.12；負責人
論文及專著
期刊論文
K. Wang*, M. Li, Q. Liu, Evolution mechanisms of the primary α and β phases during α/β deformation of an α/β titanium alloy TC8, Materials Characterization, 120 (2016) 115-123
K. Wang*, D.L. Sun, Y.L. Wu, R.L. Xin, M.Y. Wu, Q. Liu，Correlation between flow behavior and microstructure evolution during α/β deformation of TA19 titanium alloy, Advanced Engineering Materials，
K. Wang*, M.Q. Li, Characterization of discontinuous yielding phenomenon in isothermal compression of TC8 titanium alloy, Trans. Nonferrous Met. Soc. China, 26(2016) 1583-1588.
K. Wang, M.Q. Li. Morphology and crystallographic orientation of the secondary α phase in a compressed α/β titanium alloy.Scripta Materialia, 68 (2013) 964-967
K. Wang, M.Q. Li. Effect of hot deformation and heat treatment on secondary α phase evolution of TC8 titanium alloy. Materials Science and Engineering A, 613 (2014) 209-216
K. Wang, M.Q. Li. Flow behavior and deformation mechanism in the isothermal compression of the TC8 titanium alloy. Materials Science and Engineering A, 600 (2014) 122-128.
K. Wang, M.Q. Li, J. Luo, C. Li. Effect of the δ phase on the deformation behavior in isothermal compression of superalloy GH4169. Materials Science and Engineering A, 528 (2011) 4723-4731.
K. Wang, M.Q. Li, C. Li. The δ and austenite phase evolution and model in the solution treatment of superalloy GH4169. Materials Science and Technology, 29 (2013) 346-350
李晨, 李淼泉, 王柯. 固溶處理GH4169合金的高溫變形行為. 航空學報, 31 (2010) 368-376
H.M. Li, M.Q. Li, J. Luo, K. Wang, Microstructure and mechanical properties of heat-treated Ti–5Al–2Sn–2Zr–4Mo–4Cr,Trans. Nonferrous Met. Soc. China, 25(2015) 2893-2900.
W.J. He, C. Li, B.F. Luan, R.S. Qiu, K. Wang, Z.Q. Li, Q. Liu, Deformation behaviors and processing maps of CNTs/Al alloy composite fabricated by flake powder metallurgy, Trans. Nonferrous Met. Soc. China, 25(2015) 3578-3584.
1.K. Wang*,
2.K. Wang*,
3.K. Wang*,
4.K. Wang
5.K. Wang
6.K. Wang
7.K. Wang
8.K. Wang
9.王柯
10.K. Wang,
11.K. Wang
會議論文
K. Wang, M.Q. Li. Secondary a Phase Evolution in the Isothermal Compression and Heat Treatment of TC8 Titanium Alloy. PRICM: 8 Pacific Rim International Congress on Advanced Materials and Processing. Published Online: 6 SEP 2013. DOI:10.1002/9781118792148.ch325
K. Wang*, B.F. Luan, M.Q. Li, Q. Liu, Phase dependent restoration mechanisms of TC8 titanium alloy during hot compression in the two phase region, IOP Conf. Series: Materials Science and Engineering, 89 (2015) 012047
