人物經歷
1977年11月生於山西靜樂縣，2000年6月南京化工大學過程裝備與控制工程專業獲工學學士學位，2003年6月於南京工業大學化工過程機械專業獲工學碩士學位，2007年6月於華東理工大學化工過程機械專業獲工學博士學位，2007年7月迄今任教於華東理工大學機械與動力工程學院。
研究方向
高性能換熱裝備、微型化學（化工）機械系統等。
主要貢獻
1.Zhou Guo-yan, Tu Shan-tung, Ma Hugen. Numerical and experimental study on heat transfer and pressure drop in compact recuperators. Journal of Heat Transfer-Transactions of the ASME, 2014, 136(7), 071801
2.Zhou Guo-yan, Wu En, Tu Shan-tung. Optimum selection of compact heat exchangers using non-structural fuzzy decision method. Applied Energy, 2014, 113: 1801-1809
3.Zhou Guo-yan, Zhuang Fakun, Tu Shan-tung, et al. Determination of creep parameters from three-point bending test with C-shape specimen. International Journal of Pressure Vessels and Piping, 2013, 110: 57-60
4.Zhou Guo-yan, Tu Shan-tung, Xuan Fu-Zhen, Wang Zhengdong. Viscoelastic model to describe mechanical response of compact heat exchangers with plate-foam structure. International Journal of Mechanical Sciences, 2011, 53(12): 1069-1076
5.Zhou Guo-yan, Wu En, Tu Shan-tung. Techno-economic study on compact heat exchangers. International Journal of Energy Research, 2008, 32(12):1119-1127
6.Zhou Guo-yan, Tu Shan-tung. Viscoelastic analysis of rectangular passage of microchanneled plates subjected to internal pressure. International Journal of Solids and Structures, 2007,44(21): 6791-6804
7.Zhou Guo-yan, Tu Shandong, Ling Xiang. Numerical simulation and experimental study on the performance of gas/liquid spiral separator. Chinese Journal of Chemical Engineering, 2005, 13(5): 596-603
8. Zhuang Fakun,Zhou Guo-yan, Tu Shan-Tung. Numerical investigation of friction effect on creep properties evaluation for different small specimen creep tests. International Journal of Pressure Vessels and Piping, 2013, 110: 42-49
9. Zhuang Fakun, Tu Shan-tung,Zhou Guo-yan, Wang Qiongqi. Assessment of creep constitutive properties from three-point bending creep test with miniaturized specimens. J Strain Anal Eng, 2014, 49(7): 482-491
10. Zhuang Fakun, Tu Shan-tung,Zhou Guo-yan, Wang Qiongqi. A small cantilever beam test for determination of creep properties of materials. Fatigue & Fracture Engineering Materials & Structures, 2014, doi: 10.1111/ffe.12225
11. Tan Xiang-hui, Zhu Dong-sheng,Zhou Guo-yan*, Zeng Li-ding. Heat transfer and pressure drop performance of twisted oval tube heat exchanger. Applied Thermal Engineering, 2013, 50(1): 374-383
12. Tan Xianghui, Zhu Dongsheng,Zhou Guo-yan*, Zeng Liding. 3D numerical simulation on the shell side heat transfer and pressure drop performances of twisted oval tube heat exchanger. International Journal of heat and mass transfer, 2013, 65: 244-253
13. Zheng Wei-ye, Zhu Dongsheng,Zhou Guo-yan*, Wu Jia-fei, Shi Yun-yi. Thermal performance analysis of closed wet cooling towers under both unsaturated and supersaturated conditions. International Journal of heat and mass transfer, 2012, 55(25-26): 7803-7811
14. Tan Xianghui, Zhu Dongsheng,Zhou Guo-yan, Zeng Liding. Experimental and numerical study of convective heat transfer and fluid flow in twisted ovaltubes. International Journal of heat and mass transfer, 2012, 55(17-18): 4701-4710
15. Tu Shan-tung,Zhou Guo-yan. Creep of brazed plate-fin structures in high temperature compact heat exchangers. Frontiers of Mechanical Engineering in China, 2009, 4(4): 355-362
16. 陳興, 周幗彥*, 塗善東. T型釺焊接頭蠕變裂紋擴展的有限元分析. 機械強度, 2014, 36(5): 790-796
17. 朱輝, 周幗彥*, 朱冬生, 安東旭, 於騰祥. 基於MATLAB的管殼式換熱器分段計算研究. 製冷與空調, 2014, (3): 270-275,280
18. 包春鳳, 周幗彥*, 塗善東, 羅豪鑫. 高溫小型回熱器傳熱和阻力性能數值模擬和試驗研究. 化學工程, 2014
19. 郭震, 楊錦春, 周幗彥*, 朱凌雲, 郎紅方, 朱輝. 三葉孔板換熱器殼程傳熱與壓降的試驗研究. 化工學報, 2014
20. 朱凌雲, 郎紅方, 周幗彥*, 等. 三葉孔板換熱器殼程流動及傳熱數值模擬. 化工學報, 2014, 65(3): 829-835
21. 許光第, 周幗彥*, 朱冬生, 曾力丁, 朱凌雲, 郭震. 管殼式換熱器設計及軟體開發. 流體機械，2013, (4): 38-42
22. 文宏剛, 周幗彥, 朱冬生, 覃新川. 折流板切口方向對管殼式換熱器傳熱性能的影響. 化學工程, 2012, 40(4) : 29-32,36
23. 莊法坤, 周幗彥, 塗善東. 三點彎拱形小試樣測量蠕變參數的理論分析. 機械強度, 2012, 34(2): 105-111
24. 雷俊傑, 周幗彥, 朱冬生. 預測管殼式換熱器溫度分布的模型. 化學工程, 2011, 39(11): 30-35
25. 周幗彥, 塗善東, 軒福貞, 王正東. 開孔泡沫金屬緊湊式換熱器高溫力學性能研究. 機械工程學報, 2011, 32(5): 128-132
26. 周幗彥, 塗善東, 軒福貞,王正東. 釺焊板翅結構殘餘應力分布與最佳化研究. 核動力工程, 2010, 31(4): 101-105。
