![李君蘭[天津大學機械工程學院副教授]](/img/b/d7f/nBnauM3XyQDN5czM2MzNxkjM2UTM1QDN5MjM5ADMwAjMwUzLzczL1IzLt92YucmbvRWdo5Cd0FmLyE2LvoDc0RHa.jpg "李君蘭[天津大學機械工程學院副教授]")
獲獎
2017.08- 天津大學，機械工程學院，副教授
2013.01-2017.08 天津大學，機械工程學院，講師
2016.09-2017.08 英國牛津大學 (University of Oxford)，訪問學者
2010.09-2012.12 清華大學，精密儀器與機械學系，博士後
社會任職
IEEE學會會員，國際仿生工程學會會員，擔任多個國際學術期刊審稿人： Applied Thermal Engineering、Aerospace Science and Technology、Advances in Space Research、 Journal of Aerospace Engineering、International Journal of Mechanical Science、Advances in Mechanical Engineering 等。
期刊論文
[1] Junlan Li*, Hongzhou Huang, Shaoze Yan, Yunqiang Yang, Kinematic accuracy and dynamic performance of a simple planar space deployable mechanism with joint clearance considering parameter uncertainty, Acta Astronontica. 2016, accepted.(SCI)
[2] Yan Chen, Weilin Lv, Junlan Li, Zhong You*, An Extended Family of Rigidly Foldable Origami Tubes, Journal of Mechanisms and Robotics. 2016, accepted.(SCI)
[3] Wu Jianing, Yan Shaoze*, Li Junlan, Gu Yongxia. Mechanism reliability of bistable compliant mechanisms considering degradation and uncertainties: modelling and evaluation method, Applied Mathematical Modelling, 2016, 40(23): 10377–10388.(SCI)
[4] Delin Cui, Shaoze Yan*, Junlan Li, Zhaoye Qin, Xiaosong Guo, Dynamic analysis of satellite separation considering the flexibility of interface rings, Proceedings of the Institution of Mechanical Engineers, Part G, Journal of Aerospace Engineering, 2015, 229(10): 1886-1902. (SCI)
[5] Jieliang Zhao, Jianing Wu, Shaoze Yan, Junlan Li, Yongxia Gu. Dynamic modelling and motion precision analysis of spacecraft manipulator with harmonic drive considering the alternate thermal field in orbit. Proceedings of the Institution of Mechanical Engineers, Part G, Journal of Aerospace Engineering, 2015，,29： 135-148.(SCI)
[6] Delin Cuia, Jieliang Zhao, Shaoze Yan*, Xiaosong Guo, Junlan Li, Analysis of parameter sensitivity on dynamics of satellite separation. Acta Astronautica, 2015, 114: 22-33.(SCI)
[7] Junlan Li*, Shaoze Yan. Thermal induced vibration of composite solar array with honeycomb panels in low earth orbit, Applied thermal engineering. 2014, 71(1), 419-432. (SCI)
[8] Junlan Li*, Shaoze Yan, Xuefeng Tan. Dynamic-Envelope Analysis of Clamp-Band Joint Considering Pyroshock of Satellite Separation, Journal of Spacecraft and Rockets. 2014, 51(5): 1390-1400.(SCI)
[9] Jianing Wu, Junlan Li, Shaoze Yan*. Design of Deployable Bistable Structures for Morphing Skin and Its Structural Optimization, Engineering Optimization. 2014, 46(6): 745–762. (SCI)
[10] Fujun Wang, Junlan Li, Shiwei Liu, Xingyu Zhao, Dawei Zhang, and Yanling Tian. An Improved Adaptive Genetic Algorithm for Image Segmentation and Vision Alignment Used in Microelectronic Bonding. IEEE/ASME Transactions on Mechatronics, 2014, 19(3), 916-923.(SCI)
[11] Junlan Li, Shaoze Yan*, Feng Guo, Pengfei Guo, Effects of damping, friction, gravity, and flexibility on the dynamic performance of a deployable mechanism with clearance, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2013, 227(8), 1791-1803. (SCI)
[12] Junlan Li, Jianing Wu, Shaoze Yan*, Conceptual design of deployment structure of morphing nose cone, Advances in Mechanical Engineering. 2013, 590957.(SCI)
[13] Junlan Li, Shaoze Yan*, Renyu Cai. Thermal analysis of composite solar array subjected to space heat flux, Aerospace science and technology. 2013, 27(1): 84-94. (SCI)
[14] Junlan Li*, Dawei Zhang, Camera calibration with a near-parallel imaging system based on geometric moments, Optical Engineering, 2011, 50(2), 023601.(SCI)
[15] 李君蘭，閻紹澤*，吳曉燕，楊運強. 太陽翼可展結構頻率的重力勢影響分析, 清華大學學報，2012,54(1): 25-30. (EI)
[16] 李君蘭，劉士為，張大衛*，面向晶片引線鍵合的視覺精確定位方法，天津大學學報, 2012, 45(5) : 405-410. (EI)
[17] 李君蘭*, 張大衛, 王以忠, 趙興玉, 孔凡芝. 面向IC封裝的顯微視覺定位系統. 光學精密工程, 2010, 4: 965-972. (EI)
[18] Junlan Li*, Yizhong Wang, Dawei Zhang, Xingyu Zhao. Design and Simulation of the Positioning System Using Computer Vision for IC Packaging. Journal of Shanghai Jiaotong University (Science), 2008, 13, SUPPL.: 91-95. (EI)
[19] Yanling Tian, Zhiyong Guo, Fujun Wang, Junlan Li, Dawei Zhang. Design and Experimental Investigation of a 2-DOF Planar Micro-Positioning Table, International Journal of Intelligent Mechatronics and Robotics, 2012, 3(2): 39-54.
[20] Hongchang Huang, Yunqiang Yang*, Junlan Li, Shaoze Yan. Development of Thermal-structural Analysis for Spacecraft Solar Array, Electro-Mechanical Engineering, 2012, 28(4): 1-7. (in Chinese)
期刊論文
[1] Junlan Li*, Hongzhou Huang, Yunqiang Yang, Modeling and Simulation of Joint Clearance Effects on Space Manipulator, 2015 IEEE International Conference on Mechatronics and Automation (ICMA),. 2015: 1852-1857. (EI)
[2] Hongzhou Huang, Junlan Li*, Yunqiang Yang, Shaoze Yan, Dynamics Modeling and Simulation of Deployable Mechanism with Double Clearance, Key Engineering materials, 2016, 685: 452-457. (EI)
[3] Junlan Li, Shaoze Yan*, Xuefeng Tan. Modeling and simulation of clamp band dynamic envelope in a LV/SC separation system, 2nd International Conference on Functional Manufacturing and Mechanical Dynamics, 2012.01, 141: 359-363. (EI)
[4] Shiwei Liu, Junlan Li*, Xingyu Zhao, Dawei Zhang, Achievement of Dynamic-Link Library for Image Segmentation Based on LabVIEW, 14th International Manufacturing Conference in China(IMCC2011), 2011.10, 697-698: 805-808. (EI)
[5] Shiwei Liu, Junlan Li*, Xingyu Zhao, Dawei Zhang, A Vision Alignment Method Based on Improved Genetic Algorithm for IC Packaging, 2nd International Conference on Manufacturing Science and Engineering(ICMSE), 2011.04, 189-193: 4177-4181. (EI)
[6] Junlan Li, Yizhong Wang*, Xingyu Zhao, Fanzhi Kong, Dawei Zhang. Calibration of Computer Vision Positioning System for MEMS Wire Bonder. Photonics Asia 2007, Beijing, China: 68360F.(EI)
