個人簡歷
2001年6月畢業於北京航空航天大學動力工程系飛行器動力工程專業，獲工學學士學位；2009年2月，畢業於北京航空航天大學能源與動力工程學院航空宇航推進理論與工程，獲工學博士學位；2012年10月，英國布里斯托大學航空航天工程學院，項目合作者，從事金屬橡膠力學性能的研究工作 。
教學方面，承擔“機械振動基礎”，“燃氣輪機結構動力特性”，“機械系統診斷理論與工程”，“Jet Engines”，“本科專業綜合實驗”，“專業課程設計”等本科/研究生課程的教學工作，參與編著的研究生教材“航空燃氣渦輪發動機總體結構設計與動力學分析”榮獲“研究生精品課程建設配套教材”的立項資助。
科研方面，主持國家重點預研項目APXX項目一項，國家自然科學基金一項 ；省部級項目3項；研究所合作課題多項；作為核心技術骨幹參與973計畫、ATXX計畫、APXX計畫、自然基金等多項國家重點項目以及多家科研院所橫向項目四十餘項。現為美國機械工程師學會（ASME）會員，與英國布里斯托大學、謝菲爾德大學和美國維吉尼亞大學保持著密切合作與聯繫。在國內外重要刊物、會議上發表SCI 、EI索引文章六十餘篇。
Teaching
Course name Lectures per year Object
Mechanical vibration 32 Undergraduates
Specialty experiments: rotor dynamics 16 Undergraduates
Specialty experiments: modal test 16 Undergraduates
Mechanical system diagnosis theory 32 Graduates
Dynamic characteristics analysis for gas turbine structures 32 Graduates
Funding
Total funding received as principal investigator so far: ￥ 4,220,000
Representative projects:
² Grant No. XXXX-0101: ￥2,450,000, from Aviation Industry Corporation of China
² Grant No. 51475021: ￥840,000, from National Natural Science Foundation of China
² Grant No. 51105022: ￥250,000, from National Natural Science Foundation of China
² Grant No. AXXX-0842: ￥150,000, from Aviation Industry Corporation of China
Awards
² The first prize for scientific paper, awarded by Beijing government, 2012
² The first prize for science and technology, awarded by Beihang University, 2011
² The first prize for teaching improvements, awarded by Beihang University, 2013
² The second prize for technology improvement, awarded by Aviation Industry Corporation of China, 2014
Monograph Chapters
² Configuration design and dynamic analysis for gas turbine engines. Beihang university press, Beijing, P.R.China, 2014 (in Chinese). The Applicant is in charge of Chapters 4, 5.
² The Design Problem of Aero-Engine Structure Strength. Shanghai Jiaotong University Press, Shanghai, P.R.China, 2015 (in Chinese). The Applicant is in charge of Chapter 5.
Representing publications
1. Ma Y, Zhang Q, Zhang D*, Scarpa F, et al. The mechanics of shape memory alloy metal rubber. Acta Materialia, 2015, 89-100.
2. Ma Y, Zhang Q, Zhang D*, Scarpa F, et al. Tuning the vibration of a rotor with shape memory alloy metal rubber supports. Journal of Sound and Vibration, 2015, 351:1-16.
3. Ma Y, Zhang Q, Zhang D*, Scarpa F, et al. A novel smart rotor support with shape memory alloy metal rubber for high temperatures and variable amplitude vibrations. Smart Materials and Structures, 2014, 23(12).
4. Zhang D, Scarpa F*, Ma Y, Hong J, et al. Dynamic mechanical behavior of nickel-based superalloy metal rubber. Materials and Design, 2014, 56:69-77.
5. Zhang D, Scarpa F*, Ma Y, Boba K, et al. Compression mechanics of nickel-based superalloy metal rubber. Materials Science & Engineering A, 2013, 580:305-312.
*represents corresponding author
Selected publications
1. Ma Y, Gao D, Zhang D*, et al. Compressive and dissipative behavior of metal rubber under constraints. Physica Status Solidi (b), 2015. DOI 10.1002/pssb.201451617.
2. Ren D, Zhang D*, He Y, et al. Vibration response investigation on structures with particle metal rubber fillings. Journal of Propulsion Technology, 2015,36(1):124-129. (In Chinese)
3. Zhang D, Liu Y, Liang Z, et al. Prediction for the critical speed of double spools system in aero engines. Journal of Propulsion Technology, 2015,36(2):292-298. (In Chinese)
4. Zhang D, Liu Y, Liang Z, et al. Investigation on dynamical modeling and vibration characteristics for aero engine. Journal of Propulsion Technology, 2015,36(2):292-298. (In Chinese)
5. Yang X, Ma Y, Zhang D,Hong J. Vibration control of intelligent beam with shape memory alloy. Acta Aeronautica et Astronautica Sinica, 2015,36(5):768-773. (In Chinese)
6. Zhang D, Ma Y*, Hong J, Chen L. Failure analysis of turbine blades in a small turbofan engine through dynamical study. Journal of Vibration Engineering and Technologies, 2014, 2(2): 127-139.
7. Ma Y, Liang Z, Wang H, Zhang D*, et al. Theoretical and experimental steady-state rotordynamics of an adaptive Air Film Damper with Metal Rubber. Journal of Sound and Vibration, 2013,332:5710-5726.
8. Ma Y, Scarpa F*, Zhang D, et al. A nonlinear auxetic structural vibration damper with metal rubber particles. Smart Materials and Structures, 2013, 22(8), 084012.
9. Zhang D, Liu S, Liu B, Hong J*. Investigation on bending fatigue failure of a micro-gear through finite element analysis. Engineering Failure Analysis, 2013, 31:225-235.
10. Ma Y, Zhu H, Zhang D*, et al. Experimental investigation on shape memory alloy metal rubber. Science China Technological Sciences, 2013, 56(8): 1949-1955.
11. Ma Y, Tong X, Zhu B, Zhang D*, et al. Theoretical and experimental investigation on thermophysical properties of metal rubber, Acta Physica Sinica, 2013, 62(4): 048101. (In Chinese)
12. Zhang D ,Hong J, Ma Y, et al. Novel structural design of mixed-flow compressor with high structural efficiency. Journal of Aerospace Power, 2013, 28(4):866-871. (In Chinese)
13. Wang G, Liu H, Zhang D*, Hong J. Study on formulating method for vibration environment test profiles of aero-engine accessories. Journal of Propulsion Technology, 2013, 34(8): 1101-1107. (In Chinese)
14. Hong J, Liu B, Zhang D*, Ma Y. Research on the shape memory effect and thermalelasticity of a novel intellectual damping material. Acta Physica Sinica, 2012, 61(16): 168102. (In Chinese)
15. Liu S, Ma Y*, Zhang D, Hong J. Studies on dynamic characteristics of the joint in the aero-engine rotor system. Mechanical Systems and Signal Processing, 2012, 29:120136.
16. Zhu B, Ma Y*, Zhang D, et al. A constitutive model of metal rubber based on hysteresis property. Acta Physica Sinica, 2012, 78101. (In Chinese)
17. Hong J, Liu B, Zhang D*, Ma Y. Shape memory effect and hysteresis behavior of Shape Memory Alloy Metal Rubber. ASME: GT2012-69244, 2012.
18. Li J, Hong J, Ma Y, Zhang D. Modelling of misaligned rotor systems in aero-engines, ASME: IMECE2012-85706, 2012.
19. Hong J, Liu S, Zhang D, Chen M. Fatigue failure analysis of turbine blade in miniature short life turbofan engine. Journal of Aerospace Power, 2012, 27(3): 604-609. (In Chinese)
20. Hong J, Yang X, Chen L, Zhang D. Damping assessment and improving design of blade shrouds based on contact states. Journal of Beijing University of Aeronautics and Astronautics, 2012,38(5): 681-687. (In Chinese)
21. Hong J, Yang X, Chen L, Zhang D. Experiments of contact stiffness and fretting wear on coating material of blade shroud. Journal of Beijing University of Aeronautics and Astronautics, 2012, 38(10): 1280-1284. (In Chinese)
22. Zhang D, Hong J*, Ma Y, et al. A probability method for prediction on High Cycle Fatigue of blades caused by aerodynamic loads. Advances in Engineering Software Journal, 2011, 42:1059-1073.
23. Zhang D, Hong J, Ren D. Dynamical analysis on shell structure made of C/C-SiC composite materials. Journal of Aerospace Power, 2011, 26(5):818-822. (In Chinese)
24. Zhang D, Ma Y, Hong J. Experimental verification on bidirectional sequential method to solve dynamical response caused by aerodynamic loads. Journal of Aerospace Power, 2011, 6: 013. (In Chinese)
25. Liu B, Hong J, Zhang D, et al. Fatigue failure analysis of a minitype straight bevel driven gear. Energy Procedia, 2011, 13: 5216-5222.
26. Hong J, Chen L, Ma Y, Zhang D. Dynamic characteristics of dry friction damping at bladed disk joints: experiments. ASME: GT2011-45965, 2011.
27. Liu B, Ma Y, Zhang D, Hong J. Experiment investigation on the effect of heat treatment on metal rubber mechanical properties. Journal of Beijing University of Aeronautics and Astronautics, 2011, 39(2): 259-263. (In Chinese)
28. Zhang D, Ma Y, Liang Z, et al. Evaluation method on whole engine structural design - structural efficiency. Journal of Aerospace Power, 2010, 25(10): 2070-2176. (In Chinese)
29. Zhang D, Ma Y, Hong J. Dynamical response analysis on blades arisen by aerodynamic forces through sequential method, Journal of Aerospace Power, 2009, 24(7):1523-1529. (In Chinese)
30. Hong J, Zhang D, Chen L. Review on investigation of high cycle fatigue failures for the aero engine blade. Journal of Aerospace Power, 2009(3): 028. (In Chinese)
31. Zhang D, Ma Y, Hong J, et al. Dynamical response analysis on blades arisen by aerodynamic forces through sequential method. Journal of Aerospace Power, 2009, 7: 016. (In Chinese)
32. Ma Y, Zhang D, Hong J, et al. Prediction on high cycle life of blades using probability method. Journal of Propulsion Technology, 2009, 30(4): 462-466. (In Chinese)
33. Zhang J, Xu L, Zhang D*, Hong J. Optimization method for static strength of swept-curved blade based on stacking line design. Journal of Propulsion Technology, 2014, 35(4):544-550. (In Chinese)
34. Hong J, Zhang D, Shi Y, et al. Experimental study of damping characteristic of shrouded blade. ASME: GT2007-27610, 2007.
35. Ma Y, Hong J, Zhang D, et al. Study of transient characteristic of a simple rigid rotor supported on a squeeze film damper with valvular metal rubber squeeze film ring. ASME: GT2007-27162, 2007.
36. Hong J, Deng Y, Zhang D. Dynamic design method of elastic ring squeeze film damper. Journal of Beijing University of Aeronautics and Astronautics, 2006, 32(6): 649. (In Chinese)
37. Zhang D, Shi Y, Hong J. Model analysis of bladed disk coupled system of compressor with low aspect ratio. Journal of Beijing University of Aeronautics and Astronautics, 2004, 9: 001. (In Chinese)
*represents corresponding author
Selected talks
1. Mechanical characteristics of metal rubber and its application. Invited talk, 5th International Conference for Auxetics and Other Materials and Models with "Negative" Characteristics, Poznan, Poland, September, 2014.
2. Tuning the vibration of a rotor with shape memory alloy metal rubber supports. Contributed talk, 9th IFToMM ICORD 2014, Milano, September, 2014.
3. Experimental study on the dynamic characteristics of joints in rotor system. Contributed talk, 9th IFToMM ICORD 2014, Milano, September, 2014.
4. Structure design and mechanical simulation on the SC-MR support for rotor system. Contributed talk, 29th ICAS Congress, St. Peterburg, Russia, 2014.
5. Prediction for the critical speed of counter-rotating double spools system in gas engines. Contributed talk, 11th Rotor dynamics Congress, Dalian, P.R.China, 2014.
6. Experimental investigation on dynamic mechanical behavior of the elastic ring support with metal rubber. Contributed talk, ASME-IMECE, San Diego, USA, November, 2013.
7. Bending stiffness and dynamic characteristics of a rotor with spline joints. Contributed talk, ASME-IMECE, San Diego, USA, November, 2013.
8. Vibration problems of blades and their solutions in aero engines. Invited talk, 3rd workshop for aero engines dynamical problems, Beijing, P.R.China, 2013.
9. Shape memory effect and hysteresis behavior of Shape Memory Alloy Metal Rubber. Contributed talk, ASME Turbo Expo 2012, Copenhagen, Denmark, June, 2012.
10. Study on rubbing failure between fan vanes and spacer ring of a turbo-fan engine. Contributed talk, ASME Turbo Expo 2010, Glasgow, UK, June, 2010
Other professional activities
² Referee for Smart Materials and Structures, Journal of Sound and Vibration, Engineering Failure Analysis, Advances in Engineering Software, Chinese Physics B, Journal of propulsion technology and Journal of Aerospace Power
² 10/06/2011 - Present: Member of ASME (American Society of Mechanical Engineers)
² 01/03/2011 - Present: Member of CSA (Chinese Society of Aviation)
² 01/03/2013 - Present: Member of CSVE (Chinese Society for Vibration Engineering)
² 01/08/2014 - Present: Council member of CSRD (Chinese Society for Rotor Dynamics)
