張坤[中國科學院力學研究所副研究員]

張坤，中國科學院力學研究所博士後、副研究員，碩士生導師。主要研究方向為塗鍍層評價與設計。

基本信息

張坤，碩導，中國科學院力學研究所, 博士後、助研、副研究員。

工作經歷

2008-02~2008-08,Loughborough University,Academic Visitor

1997-07~現在,中國科學院力學研究所,博士後、助研、副研究員

1995-07~1997-07,中國科學院金屬研究所,博士後

1992-03~1995-07,西北工業大學,博士

研究領域

塗鍍層評價與設計

社會任職

中國機械工程學會表面工程分會 委員中國機械工程學會失效分析分會 專家《Surface Engineering》 reviewer 湘潭大學材料與光電物理學院 兼職教授科技部863計畫課題 同行專家《Materials Letters》 reviewer 《力學文摘》 編委《中國雷射》 審稿人

獲獎及榮譽

2008年國防技術發明三等獎

論文

1 Kun ZHANG, Qing PENG, Guang-Nan Chen, A special method to evaluate the strong adhesion between brittle coating and ductile substrate, Key Engineering Materials

2 Wu, C.W.; Zhang, K.; Chen, G.N，Characterising of internal stresses in duplex coating by FEM，Surface Engineering

3 Huaixue Li, Guangnan Chen, Kun Zhang, Gengxing Luo and Zhijun Ye，Degradation failure features of chromium-plated gun barrels with a laser-discrete-quenched substrate，Surface & coating Technolog

4 Ban-Quan Yang, Kun Zhang, Guang-Nan Chen, Geng-Xing Luo and Jing-Hua Xiao，Effect of a laser pre-quenched steel substrate surface on the crack driving force in a coating–steel substrate system，Acta Materialia,

5 Chen-Wu Wu, Ban-Quan Yang, Guang-Nan Chen, Kun Zhang and Jing-Hua Xiao. On the tensile behaviors of a hard chromium coating plated on a steel substrate with periodic subsurface inclusions. Surface and Coatings Technology

6 Kun Zhang, Chen-Wu Wu, Ying Hu, Guang-Nan Chen, The design and application of a novel duplex coating formed by laser pre-treatment, Solid State Phenomena

7 Huanxue Li, Kun Zhang, Guangnan Chen, Gengxing Luo, Zhijun Ye, Characterization of a laser-discrete quenched steel substrate/chromium system by dissolving coatings, Surface Coatings and Technology

8 Chen-Wu Wu, Guang-Nan Chen, Kun Zhang/, Ying Hu, Nai-Gang Liang, On the formation of periodic segmentation cracks in a coating plated on a substrate with periodic subsurface inclusions, Surface Coatings and Technology

9 B.Q. Yang, K. Zhang, G.N. Chen, G.X. Luo, J.H. Xiao, A quantitative analysis of the effect of laser transformation hardening on crack driving force in steels, Surface Coatings and Technology

10 Huanxue Li, Guangnan Chen, Guoxiang Zhang, Kun Zhang, Gengxing Luo, Characteristics of the interface of a laser-quenched steel substrate and chromium electroplate, Surface Coatings and Technology

11 Xuejun Chen. Kun Zhang, Guangnan Chen, Gengxing Luo, Interfacial debonding of a multi-cracked and coated hollow cylinder due to convective heating, Surface Coatings and Technology

12 Chen-Wu Wu, Guang-Nan, Kun Zhang, Geng-Xing Luo, Nai-Gang Liang, The effect of periodic segmentation cracks on the interfacial debonding, Surface Coatings and Technology

13 Xuejun Chen. Kun Zhang, Guangnan Chen, Gengxing Luo, Multiple axial cracks in a coated cylinder due to thermal shock, International Journal of Solids and Structures

14 Su Jianyu, Zhang Kun, Chen Guangnan，Evaluation of the interfacial adhesion between brittle coating and ductile substrate by cross-sectional indention，材料熱處理學報

15 XU Xiang-yang, ZHANG Kun, HAN Jian-min, Chen Guang-nan，Metallographic sample prepared by ion beam etching. Transactions of Nonferrous Metal Society of China

16 G. Song//, K. Zhang and G. N. Chen，Electron beam surface treatment.Vacuum

17 R.G. Song//, K. Zhang, G.N. Chen, Electron beam surface remelting of AISI D2 cold-worked die-steel, Surface Coating and Technology

18 K. Zhang, G.N. Chen, Grain structure of laser remelted 7075 aluminium alloy in the presence of Al2O3 particles, Materials Science and Technology

19 Rao Qunli//, Wang Haowei, Zhang Kun, Fan xiaolan, Zhou Yaohe, Effects of heat-treatment processes on the electroless Ni-B coating and its natural aging mechanism, Transactions of the Institute of Metal Finishing

20 K. Zhang, G.N. Chen, Influence of SiC particulates on grain structure development of an aluminum 7075 alloy during laser rapid solidification, Journal of Materials Science Letters

21 K. Zhang//, G.N. Chen, Effect of SiC particles on crystal growth of Al-Si alloy during laser rapid solidification, Materials Science and Engineering A,

22 楊班權, 陳光南, 張坤, 羅耕星, 肖京華. 塗層/基體材料界面結合強度的表征和測量方法的現狀與展望. 力學進展

23盧哲猛，吳臣武，張坤/，彭青，陳光南，塗層界面性能測試的類懸臂樑模型，材料熱處理學報

24 張坤，蘇建宇，張國祥，吳臣武，彭青，陳光南，橫截面壓入時典型塗層界面的剝離行為，中國表面工程

25 張坤，羅耕星，陳光南，鈦的雷射滲氧硬化研究，金屬熱處理

專利

1 張坤，陳光南,羅耕星，肖京華,鈦或其合金的快速滲氧硬化方法

2 陳光南,武曉雷,羅耕星,張坤,紀全,孫傳香：用於細小狹長管狀工件內表面雷射強化加工的裝置

3 陳光南,武曉雷,羅耕星,張坤,紀全,孫傳香：管狀工件內表面雷射強化方法與裝置(國防)

承擔科研項目情況

1 “高溫合金構件力學性能與製備”，中國科學院知識創新工程重大項目子課題

2 “反恐防暴非致命技術”，國防基礎科研項目

3 “金屬表面塗層材料的界面結合性能表征”，國家自然科學基金重點項目

4 “塗層工藝力學”，Loughborough University訪問學者項目

5 “鈦合金部件表面處理”，重慶長風機器有限責任公司委託項目

6 “基體表層離散強化對塗層開裂和剝落的控制機理”，國家自然科學基金面上項目

7“塑性變形過程中塗層板料的界面斷裂機制”，國家自然科學基金面上項目

8 “表層材料與超微材料特殊工藝及相關力學問題”，所創新項目

9 “表面形貌與性能聯合測試系統”，所裝備建設項目

10 “高能束流表面加工與處理中的超常熱物理問題”,國家自然科學基金重點項目

11 “狹長管筒內表面雷射強化技術及其套用”，中科院套用研究與發展重點項目

12 “多層纖維及其複合材料的仿生”，中國博士後科學基金

13 “複合材料仿生製備新途徑”，國家自然科學基金重點項目

14 “液相法纖維金屬基複合材料的凝固研究”，國家自然科學基金面上項目

15 “鑄造高強度C/Mg複合材料”航空科學基金資助項目