產品基本信息
性能描述
Okken低壓配電櫃額定電流：6300 A主母線最大電流：7300 A
額定短時耐受電流：50/80/100/150 kA
額定運行電壓：690 V AC
額定絕緣電壓：1000 V
額定衝擊耐受電壓：12 kV AC
防護等級：IP31/41/54
隔離形式：2b/3b/4a/4b
最大電動機容量：250 kW 400
優勢
Okken本身所具有的特性確保了其供電的高可靠性；對套用要求的完全適應性；以及高度的可升級性.其人性化的設計簡化了配電櫃的安裝，操作和維護
創新的標準功能單元方案滿足了對苛刻工期及供電連續性的要求，可以在帶電情況下對配電櫃進行檢修，維護和更換
統一結構的骨架及母線系統可以保證無論是側出線還是後出線，均有最適宜的工作條件
根據不同的用電設備所要求達到的運行維護水平，多種類型的功能單元可以裝在同一列櫃中或同一台櫃內
功能單元與配電母線通過擁有專利技術的雙夾頭系統連線，實現對配電母線的無磨損
套用範圍
Okken是一種新型模組化結構的低壓開關櫃，可以廣泛套用於工業，第三產業及基礎設施等領域內的大中型場所中的動力配電及電動機控制
英文說明
Performance Description
Rated current: 6300 A
Main bus maximum current: 7300 A
Vertical busbar current: 4000/2100 A
Rated short time withstand current: 50/80/100/150 kA
Rated Frequency: 50/60 Hz
Rated operating voltage: 690 V AC
Rated insulation voltage: 1000 V
Rated impulse withstand voltage: 12 kV AC
Voltage rating: IV
Protection class: IP31/41/54
Forms of segregation: 2b/3b/4a/4b
Maximum motor capacity: 250 kW 400
Superiority
Okken itself has the characteristics to ensure high reliability of its supply; on the application requirements of the complete adaptability; and high scalability. Its humane design simplifies the power distribution cabinet installation, operation and maintenance
Innovative programs to meet the standard functional unit and power on the demanding schedule requirements of continuity, can be charged cases, power distribution equipment for repair, maintenance and replacement
Unified structure of the skeleton and the bus system can be guaranteed either side or a rear outlet, have the most appropriate working conditions
Depending on the required electrical equipment operation and maintenance levels, many types of functional units can be installed in the same column or in the same cabinet cabinet
Functional unit and the power distribution bus through patented technology to connect dual chuck system to realize the wear-free power distribution bus
Applications
Okken is a new modular structure, low-voltage switch cabinet, can be widely used in industry, tertiary industry and infrastructure in the areas of medium and large establishments in the power distribution and motor control
