人物經歷
分別於1989年7月和1991年12月在哈爾濱工業大學獲得學士和碩士學位,於1995年7月在同濟大學獲得博士學位;於1998年和2001年圓滿完成哈爾濱工業大學土木、水利博士後流動站、哈爾濱工程大學船舶與海洋工程博士後流動站的研究工作;2006年做為高級訪問學者赴澳大利亞Monash大學進行短期合作研究。
現任中國土木工程學會空間結構委員會委員、中國土木工程學會風工程委員會委員、中國建築學會結構抗倒塌專業委員會委員、江蘇省地震工程學會副主任委員、建築結構學報編委。
研究方向
主要從事大跨空間結構、輕鋼結構的抗震、抗風、抗火等研究。
主要貢獻
主持了國家傑青基金、國家自然科學基金重點項目、國家自然科學基金重大研究計畫、國家科技支撐計畫項目子題、教育部博士點基金、江蘇省自然科學基金等10餘項項目的研究工作。在國內外土木類期刊ASCE、JCSR、Journal of Wind Engineering and Industrial Aerodynamics、力學學報、土木工程學報、建築結構學報以第一或通訊作者發表SCI、EI收錄論文100餘篇,出版專著1部,參編國標“高聳與複雜鋼結構檢測與鑑定技術標準”的制定。獲得7項國家發明專利授權,此外,還完成了北京四機位維修機庫、北京老山奧運腳踏車館等重要工程的現場測試、結構分析與安全評價等工作。
國家共享精品課程“工程結構抗震與防災”負責人,全國大學生結構設計競賽專家組評審。
科研項目
近五年主持的主要科研項目
國家自然科學基金重點項目、多層輕鋼龍骨式複合剪力牆結構體系創新、基礎理論與設計方法研究
國家傑出青年科學基金項目、大跨空間結構抗震、抗風研究
國家自然科學基金重大研究計畫—集成項目、空間格線結構地震災變失效機理與抗震性能提升(子題)
國家科技支撐計畫、十二五不同地區村鎮建適宜性抗震關鍵技術研究與示範(子題)
發表論文
近五年主要論文目錄
Wei Chen,Jihong Ye. Simplified prediction of the thermal and mechanical behavior of the cold-formed steel composite floor at room and elevated temperatures. Journal of Structural Engineering, ASCE, 2016, 146 (2), 70-81
Jihong Ye, Wei Chen,Zhengliu Wang. Fire-resistance behavior of a newly developed cold-formed steel composite floor. Journal of Structural Engineering, ASCE, 2016, Accepted
Wei Chen,Jihong Ye. Design of Cold-formed steel screw connections with gypsum sheathing at ambient and elevated temperatures.Applied Sciences, 2016, 6(9), 248doi:10.3390/app6090248
Ye Jihong, Zhu Nanhai. Redundancy of single-layer dome under earthquake action based on response sensitivity. International Journal of Steel Structures, 2016, 16(1), 125-138
Jihong Ye, Xingxing Wang, Mengyuan Zhao. Experimental study of shear behavior of screw connections in CFS sheathing. Journal of constructional steel research, 2016, 121: 1-12
Xingxing Wang, Jihong Ye. Cyclic testing of two- and three-story cold-formed steel (CFS) shear walls with reinforced end studs.Journal of constructional steel research, 2016, 121: 13-28
Ye JH, Wang XX, Jia HY, Zhao MY. Cyclic performance of cold-formed steel shear walls sheathed with double-layer wallboards on both sides. Thin-walled structures, 2015, 92: 146-159
Wang XX, Ye JH. Reversed cyclic performance of cold-formed steel shear walls with reinforced end studs. Journal of constructional steel research, 2015, 113:28-42
Ruoqiang Feng, Ye Jihong ,Yao Yuchang. A new type of Structure: Glass Cable Truss. Journal of Bridge Engineering-ASCE, 2015, 20(12): 04015024-9
Ruoqiang Feng, Ye Jihong, Zhu Baochen. Behavior of the bolted joints of cable-braced grid shell. Journal of Structural Engineering-ASCE, 2015, 141(12):04015071-14
Ye JH, Feng RQ, Chen W, Liu W. Behavior of cold-formed steel wall stud with sheathing subjected to compression.Journal of constructional steel research, 2015, 116(1): 79-91
Dong Xin, Ye Jihong. Development and verification of a flow model of conical vortices on saddle roofs. Journal of Engineering Mechanics, ASCE, 2015, 141(3): 04014127 1-13
Zhu Nanhai, Ye Jihong. Structural vulnerability of a single-layer dome under loading based on its form.Journal of Engineering Mechanics, ASCE, 2014, 140(1): 112-127
Wei Chen, Jihong Ye, Yu Bai, Xiao-Ling Zhao. Thermal and mechanical modeling of load-bearing cold-formed steel wall systems in fire. Journal of Structural Engineering, ASCE, 2014, 140 (8): A4013002 1-13
Liu Wenzheng, Ye Jihong. Collapse optimization for domes under earthquake using a genetic simulated annealing algorithm, Journal of Constructional Steel Research, 2014, 97: 59-68,
Ye Jihong, Dong Xin. Improvement and validation of a flow model for conical vortices. Wind and Structures, 2014, 19(2): 113-144
Jihong Ye, Wei Chen. Elevated Temperature Material Degradation of Cold-Formed Steels under Steady and Transient State Conditions. Journal of Materials in Civil Engineering, ASCE, 2013, 25(8): 947-957
Wei Chen, Jihong Ye, Yu Bai, Xiao-Ling Zhao. Improved fire resistant performance of load bearing cold-formed steel interior and exterior wall systems. Thin-Walled Structures,2013, 73(12): 145-157
Feng Ruo-qiang, Ye Jihong, Guirong Yan, Li Qing-xiang, Yao bin. Wind-induced torsion vibration of the super high-rise building of Shenzhen Energy Center. The Structural Design of Tall and Special buildings, 2013, 22(10): 802-815
Ruo-qiang Feng, Ge jinming. Shape Optimization Method of Free-form Cable-braced Grid Shells Based on the Translational Surfaces Technique. International Journal of steel structures, 2013, 13(3): 435-444
Ruo-qiang Feng, Yaobin,JihongYe. Stability of lamella cylinder cable-braced grid shells,Journal of Constructional Steel Research, 2013, 88(9): 220-230
Ruo-qiang Feng, JihongYe, Yan guirong, Jinming Ge. Dynamic nonlinearity and nonlinear single-degree-of-freedom model for cable net glazing. Journal of Engineering Mechanics, ASCE, 2013, 139(10): 1331-1346
Nyi Nyi Aung, Ye Jihong, Masters F.J. Simulation of Non-Gaussian Wind Pressure Fields on Domed Structures. Journal of the Chinese Institute of Engineers, 2013, 36(2): 257-271
Jihong Ye, Wei Chen. Elastic restrained distortional buckling of steel-concrete composite beams based on elastically supported column method. International Journal of Structural Stability and Dynamics, 2013, 13(1): 1-29
Ruoqiang feng, Jihong Ye, Bin Yao.Evaluation of the buckling load of an elliptic paraboloid cable-braced grid shell using the continuum analogy. Journal of Engineering Mechanics, ASCE, 2012, 138(12): 1468-1478
Wei Chen, Jihong Ye, Yu Bai, Xiao-Ling Zhao. Full-scale fire experiments on load-bearing cold-formed steel walls lined with different panels. Journal of Constructional Steel Research, 2012, 79(12): 242-254
Ye Jihong, Feng Ruo-qiang, Zhou Shulu, Tian Jun. The Modified Force-Density Method for Form-Finding of Membrane Structures. International Journal of Steel Structures, 2012, 12(3): 299-310
Ye Jihong, Feng Ruo-qiang, Kan Yuan. Simulation of Construction Shape-Forming Process of Cable Domes. Science China (Series E: Technological Sciences), 2012, 55(1): 101-116
Ye Jihong, Feng Ruo-qiang, Zhao Xianbo, Liu Bin. A Form-Finding Method of Beam String Structures — Offload by Steps Method. International Journal of Steel Structures, 2012, 12(2): 267-283
Ye Jihong, Ding Jinghu, Liu Chuanyan. Numerical Simulation of a Non-Gaussian Wind Load. Science China (Series E: Technological Sciences),2012, 55(11): 3057-3069
Wei Chen, Jihong Ye. Mechanical properties of G550 cold-formed steel under transient and steady state conditions. Journal of Constructional Steel Research, 2012, 73: 1-11
Dong xin, Ye Jihong. Characteristics of the Wind Pressure Distribution on a Saddle Roof. Journal of the Chinese Institute of Engineers, 2012, 35(2): 219-243
Dong Xin, Ye Jihong. The point and area-averaged wind pressure influenced by conical vortices on saddle roofs. Journal of Wind Engineering and Industrial Aerodynamics, 2012, 101:67-84
Nyi Nyi Aung, Ye. Jihong, F.J. Masters. Simulation of Multivariate Non-Gaussian Wind Pressure on Spherical Latticed Structures. Wind and Structures, 2012, 15(3): 223-245
Ye Jihong, Zhang Zhiqiang and Liu Xianming.A Simplified Multi-Support Response Spectrum Method. Earthquake Engineering and Engineering Vibration, 2012, 11(2): 312-427
Ruo-qiang Feng, Ji-hongYe, YueWu, Shi-zhao Shen. Nonlinear spectra of cable net facades.Soil and earthquake engineering, 2012, 32(1): 71-86
Ruo-qiang Feng, JihongYe, YueWu, Shi-zhao Shen. Mechanical behavior of glass panels supported by clamping joints in cable net facades.International Journal of steel structures, 2012, 12(1): 15-24
Ye Jihong, Zhang Zhiqiang and Chu Ye. Strength behavior and collapse of Spatial-reticulated Structures under Multi-Support Excitation. Science China (Series E: Technological Sciences), 2011, 54(6): 1624-1638
Ye Jihong, Pan Jinlong and Liu Xianming. Vertical coherency function model of spatial ground motion. Earthquake Engineering and Engineering Vibration, 2011, 10(3): 403-415
Ruo-qiang Feng,Ji-hong Ye, Yue Wu, Shi-zhao Shen. Nonlinear wind resistant design method of cable net facade. International Journal of Structural Stability and Dynamics, 2011, 11(6): 1163-1177
Jihong Ye, Ruo-qiang Feng, Shulu Zhou. The Modified Dynamic Relaxation Method for the Form-finding of Membrane Structures. Advanced Science Letters,2011, 4: 2845-2853
Ye Jihong, Liu Wenzheng, Pan Rui. Research on failure scenarios of domes based on form vulnerability. Science China (Series E: Technological Sciences), 2011, 54(11): 2834-2853
Ye Jihong, Chu Ye. Intensity Failure of domes under Multiple Support Excitation. Earthquake Engineering and Engineering Vibration, 2011, 10(1): 21-36
Nyi Nyi Aung, Jihong Ye. Simulation of non-Gaussian wind pressure fields on domed structures. Advanced Materials Research, 2011, 163-167: 4142-4148
Nanhai Zhu, Jihong Ye. Vulnerability analysis of structures under loads based on the form, 2011 International Conference on Multimedia Technology, HangZhou, ICMT 2011:1406-1410
1.Wei Chen,Jihong Ye. Simplified prediction of the thermal and mechanical behavior of the cold-formed steel composite floor at room and elevated temperatures. Journal of Structural Engineering, ASCE, 2016, 146 (2), 70-81
2.Jihong Ye, Wei Chen,Zhengliu Wang. Fire-resistance behavior of a newly developed cold-formed steel composite floor. Journal of Structural Engineering, ASCE, 2016, Accepted
3.Wei Chen,Jihong Ye. Design of Cold-formed steel screw connections with gypsum sheathing at ambient and elevated temperatures.Applied Sciences, 2016, 6(9), 248doi:10.3390/app6090248
4.Ye Jihong, Zhu Nanhai. Redundancy of single-layer dome under earthquake action based on response sensitivity. International Journal of Steel Structures, 2016, 16(1), 125-138
5.Jihong Ye, Xingxing Wang, Mengyuan Zhao. Experimental study of shear behavior of screw connections in CFS sheathing. Journal of constructional steel research, 2016, 121: 1-12
6.Xingxing Wang, Jihong Ye. Cyclic testing of two- and three-story cold-formed steel (CFS) shear walls with reinforced end studs.Journal of constructional steel research, 2016, 121: 13-28
7.Ye JH, Wang XX, Jia HY, Zhao MY. Cyclic performance of cold-formed steel shear walls sheathed with double-layer wallboards on both sides. Thin-walled structures, 2015, 92: 146-159
8.Wang XX, Ye JH. Reversed cyclic performance of cold-formed steel shear walls with reinforced end studs. Journal of constructional steel research, 2015, 113:28-42
9.Ruoqiang Feng, Ye Jihong ,Yao Yuchang. A new type of Structure: Glass Cable Truss. Journal of Bridge Engineering-ASCE, 2015, 20(12): 04015024-9
10.Ruoqiang Feng, Ye Jihong, Zhu Baochen. Behavior of the bolted joints of cable-braced grid shell. Journal of Structural Engineering-ASCE, 2015, 141(12):04015071-14
11.Ye JH, Feng RQ, Chen W, Liu W. Behavior of cold-formed steel wall stud with sheathing subjected to compression.Journal of constructional steel research, 2015, 116(1): 79-91
12.Dong Xin, Ye Jihong. Development and verification of a flow model of conical vortices on saddle roofs. Journal of Engineering Mechanics, ASCE, 2015, 141(3): 04014127 1-13
13.Zhu Nanhai, Ye Jihong. Structural vulnerability of a single-layer dome under loading based on its form.Journal of Engineering Mechanics, ASCE, 2014, 140(1): 112-127
14.Wei Chen, Jihong Ye, Yu Bai, Xiao-Ling Zhao. Thermal and mechanical modeling of load-bearing cold-formed steel wall systems in fire. Journal of Structural Engineering, ASCE, 2014, 140 (8): A4013002 1-13
15.Liu Wenzheng, Ye Jihong. Collapse optimization for domes under earthquake using a genetic simulated annealing algorithm, Journal of Constructional Steel Research, 2014, 97: 59-68,
16.Ye Jihong, Dong Xin. Improvement and validation of a flow model for conical vortices. Wind and Structures, 2014, 19(2): 113-144
17.Jihong Ye, Wei Chen. Elevated Temperature Material Degradation of Cold-Formed Steels under Steady and Transient State Conditions. Journal of Materials in Civil Engineering, ASCE, 2013, 25(8): 947-957
18.Wei Chen, Jihong Ye, Yu Bai, Xiao-Ling Zhao. Improved fire resistant performance of load bearing cold-formed steel interior and exterior wall systems. Thin-Walled Structures,2013, 73(12): 145-157
19.Feng Ruo-qiang, Ye Jihong, Guirong Yan, Li Qing-xiang, Yao bin. Wind-induced torsion vibration of the super high-rise building of Shenzhen Energy Center. The Structural Design of Tall and Special buildings, 2013, 22(10): 802-815
20.Ruo-qiang Feng, Ge jinming. Shape Optimization Method of Free-form Cable-braced Grid Shells Based on the Translational Surfaces Technique. International Journal of steel structures, 2013, 13(3): 435-444
21.Ruo-qiang Feng, Yaobin,JihongYe. Stability of lamella cylinder cable-braced grid shells,Journal of Constructional Steel Research, 2013, 88(9): 220-230
22.Ruo-qiang Feng, JihongYe, Yan guirong, Jinming Ge. Dynamic nonlinearity and nonlinear single-degree-of-freedom model for cable net glazing. Journal of Engineering Mechanics, ASCE, 2013, 139(10): 1331-1346
23.Nyi Nyi Aung, Ye Jihong, Masters F.J. Simulation of Non-Gaussian Wind Pressure Fields on Domed Structures. Journal of the Chinese Institute of Engineers, 2013, 36(2): 257-271
24.Jihong Ye, Wei Chen. Elastic restrained distortional buckling of steel-concrete composite beams based on elastically supported column method. International Journal of Structural Stability and Dynamics, 2013, 13(1): 1-29
25.Ruoqiang feng, Jihong Ye, Bin Yao.Evaluation of the buckling load of an elliptic paraboloid cable-braced grid shell using the continuum analogy. Journal of Engineering Mechanics, ASCE, 2012, 138(12): 1468-1478
26.Wei Chen, Jihong Ye, Yu Bai, Xiao-Ling Zhao. Full-scale fire experiments on load-bearing cold-formed steel walls lined with different panels. Journal of Constructional Steel Research, 2012, 79(12): 242-254
27.Ye Jihong, Feng Ruo-qiang, Zhou Shulu, Tian Jun. The Modified Force-Density Method for Form-Finding of Membrane Structures. International Journal of Steel Structures, 2012, 12(3): 299-310
28.Ye Jihong, Feng Ruo-qiang, Kan Yuan. Simulation of Construction Shape-Forming Process of Cable Domes. Science China (Series E: Technological Sciences), 2012, 55(1): 101-116
29.Ye Jihong, Feng Ruo-qiang, Zhao Xianbo, Liu Bin. A Form-Finding Method of Beam String Structures — Offload by Steps Method. International Journal of Steel Structures, 2012, 12(2): 267-283
30.Ye Jihong, Ding Jinghu, Liu Chuanyan. Numerical Simulation of a Non-Gaussian Wind Load. Science China (Series E: Technological Sciences),2012, 55(11): 3057-3069
31.Wei Chen, Jihong Ye. Mechanical properties of G550 cold-formed steel under transient and steady state conditions. Journal of Constructional Steel Research, 2012, 73: 1-11
32.Dong xin, Ye Jihong. Characteristics of the Wind Pressure Distribution on a Saddle Roof. Journal of the Chinese Institute of Engineers, 2012, 35(2): 219-243
33.Dong Xin, Ye Jihong. The point and area-averaged wind pressure influenced by conical vortices on saddle roofs. Journal of Wind Engineering and Industrial Aerodynamics, 2012, 101:67-84
34.Nyi Nyi Aung, Ye. Jihong, F.J. Masters. Simulation of Multivariate Non-Gaussian Wind Pressure on Spherical Latticed Structures. Wind and Structures, 2012, 15(3): 223-245
35.Ye Jihong, Zhang Zhiqiang and Liu Xianming.A Simplified Multi-Support Response Spectrum Method. Earthquake Engineering and Engineering Vibration, 2012, 11(2): 312-427
36.Ruo-qiang Feng, Ji-hongYe, YueWu, Shi-zhao Shen. Nonlinear spectra of cable net facades.Soil and earthquake engineering, 2012, 32(1): 71-86
37.Ruo-qiang Feng, JihongYe, YueWu, Shi-zhao Shen. Mechanical behavior of glass panels supported by clamping joints in cable net facades.International Journal of steel structures, 2012, 12(1): 15-24
38.Ye Jihong, Zhang Zhiqiang and Chu Ye. Strength behavior and collapse of Spatial-reticulated Structures under Multi-Support Excitation. Science China (Series E: Technological Sciences), 2011, 54(6): 1624-1638
39.Ye Jihong, Pan Jinlong and Liu Xianming. Vertical coherency function model of spatial ground motion. Earthquake Engineering and Engineering Vibration, 2011, 10(3): 403-415
40.Ruo-qiang Feng,Ji-hong Ye, Yue Wu, Shi-zhao Shen. Nonlinear wind resistant design method of cable net facade. International Journal of Structural Stability and Dynamics, 2011, 11(6): 1163-1177
41.Jihong Ye, Ruo-qiang Feng, Shulu Zhou. The Modified Dynamic Relaxation Method for the Form-finding of Membrane Structures. Advanced Science Letters,2011, 4: 2845-2853
42.Ye Jihong, Liu Wenzheng, Pan Rui. Research on failure scenarios of domes based on form vulnerability. Science China (Series E: Technological Sciences), 2011, 54(11): 2834-2853
43.Ye Jihong, Chu Ye. Intensity Failure of domes under Multiple Support Excitation. Earthquake Engineering and Engineering Vibration, 2011, 10(1): 21-36
44.Nyi Nyi Aung, Jihong Ye. Simulation of non-Gaussian wind pressure fields on domed structures. Advanced Materials Research, 2011, 163-167: 4142-4148
45.Nanhai Zhu, Jihong Ye. Vulnerability analysis of structures under loads based on the form, 2011 International Conference on Multimedia Technology, HangZhou, ICMT 2011:1406-1410
科研創新
近五年主要授權的國家發明專利
陳偉,葉繼紅,汪正流. 一種預製裝配輕鋼耐火組合樓蓋結構. 2015.07,中國發明專利,ZL201310439815.5
陳偉,葉繼紅.預製裝配輕鋼耐火承重組合牆體結構. 2015.06,中國發明專利,ZL201310442313
葉繼紅,王星星.一種預製裝配式冷成型鋼樓蓋及其施工方法. 2015.03,中國發明專利,ZL201310186550.2
陳偉,葉繼紅.全預製快速裝配式輕鋼承重複合牆體. 2014.12,中國發明專利,ZL2014107210053
葉繼紅,王星星,馮若強,陳偉.冷成型鋼房屋樑與方鋼管混凝土柱的連線節點及連線方法. 2014.10,中國發明專利,ZL2014105251152
李慶營,葉繼紅. 剪式鉸可展結構偏心節點. 2013.10,中國發明專利,ZL 2012 1 0024636.0
董欣,葉繼紅. 風洞流場顯示試驗模型鏇轉支架. 2014.02,中國發明專利,ZL 2012 1 0016917.1
葉繼紅,陳偉. 多層冷成型鋼組合房屋住宅結構. 2011.06,中國發明專利,ZL200910029950.6
1.陳偉,葉繼紅,汪正流. 一種預製裝配輕鋼耐火組合樓蓋結構. 2015.07,中國發明專利,ZL201310439815.5
2.陳偉,葉繼紅.預製裝配輕鋼耐火承重組合牆體結構. 2015.06,中國發明專利,ZL201310442313
3.葉繼紅,王星星.一種預製裝配式冷成型鋼樓蓋及其施工方法. 2015.03,中國發明專利,ZL201310186550.2
4.陳偉,葉繼紅.全預製快速裝配式輕鋼承重複合牆體. 2014.12,中國發明專利,ZL2014107210053
5.葉繼紅,王星星,馮若強,陳偉.冷成型鋼房屋樑與方鋼管混凝土柱的連線節點及連線方法. 2014.10,中國發明專利,ZL2014105251152
6.李慶營,葉繼紅. 剪式鉸可展結構偏心節點. 2013.10,中國發明專利,ZL 2012 1 0024636.0
7.董欣,葉繼紅. 風洞流場顯示試驗模型鏇轉支架. 2014.02,中國發明專利,ZL 2012 1 0016917.1
8.葉繼紅,陳偉. 多層冷成型鋼組合房屋住宅結構. 2011.06,中國發明專利,ZL200910029950.6
獲獎記錄
所指導的研究生中,1人獲教育部博士研究生學術新人獎,1人獲江蘇省優秀博士論文獎勵,3人獲江蘇省優秀碩士論文獎勵。 部分成果獲教育部科技進步二等獎(第1完成人)。
國家傑出青年基金獲得者,教育部新世紀優秀人才,江蘇省特聘教授,中國礦業大學越崎學者, 2010年獲教育部科技進步二等獎(第1完成人)