![沈東升[1]](/img/4/051/nBnauM3XzYTN2ETN3QDO4gDMwUTM1cDN0QDOzQTNwAzMxMzL0gzL2AzLt92YucmbvRWdo5Cd0FmLyE2LvoDc0RHa.jpg "沈東升[1]")
【相關經歷】
工作經歷1
公司：上海永冠商業設備有限公司時間：2004-10 至 2007-02
職位：質量部經理
職責：Job Responsibility1. In charge of routine work of quality department 2. Develop product inspection guidelines 3. Draw up system of performance assessment4. Edit training course for new staff 5. Evaluate & select venders, monitor the vender's product quality, ensure they provide products on time, with correct quantity, and of high quality 6. Make statistical analysis of product quality and provide innovation proposal7. Deal with customer's complaints 8. Monitor supplier quality performance 9. Push forward the Total Quality ManagementAchievement1. To set up a new quality dept., make defective rate drop 30% for export product2. Promote the Total Quality Management3. Introduce supplier management to company4. Carry out quality cost management
工作經歷2
公司：上海霍富汽車鎖具有限公司時間：2007-03 至 2008-08
職位：供應商質量工程師
職責：Job Responsibility1. Perform new supplier's evaluation together with purchasing personnel. 2. Perform process audits on supplier's site 3. Supplier PPAP Approval together with SQE from GM China 4. Follow up supplier’s corrective action plans originated from Audits, customer’s feedback and non conformities for Initial samples5. Take part into the supplier rating system in order to improve supplier’s quality6. Publish periodical report on supper’s follow-up activities7. Projects engaged in are SGM18/811 and Epsilon2Achievement1. Control the principal supplier’s PPM meeting the quality objective2. Coordinate relationship between quality dept. of German headquarter and Shanghai Company
工作經歷3
公司：輝門中國有限公司時間：2008-08 至 2012-04
職位：高級供應商質量與開發工程師
職責：工作描述:1. 和採購部一起評估新供應商2. 對供應商進行過程審核3. 對供應商提交的PPAP進行審閱和認可4. 對供應商在被審核和生產過程中的問題，及客戶投訴的問題進行跟蹤5. 用整套評估系統對供應商進行評估，以便提高其產品質量6. 給供應商適當的培訓，如5S, APQP, PPAP, OEE, QC Tools7. 採用精益和VA/VE的方法去開發供應商8. 擁有砂型鑄造、鍛造、壓力鑄造、注塑、衝壓、電鍍和粉末噴塗的豐富知識9. 擁有球銷、控制臂、密封圈、雨刮等項目經驗主要業績:1. 完成了對主要供應商的管控，使其PPM/OTD值在考核目標內。2. 通過培訓提高供應商內部管理水平，並協調供需雙方的關係，形成了良性的持續改進。3. 通過提高供應商的質量和內部整體管理水平，讓其有能力接海外項目的定單。4. 與供應商談判解決涉及質量、貨運、商務和流程更改的複雜問題。Job Responsibility1. Perform new supplier's evaluation together with purchasing personnel. 2. Perform supplier initial & process audits on supplier's site 3. Conduct supplier PPAP Approval 4. Follow up supplier’s corrective action plans originated from audits, customer’s feedback and non conformities for Initial samples5. Take part into the supplier rating system in order to improve supplier's quality6. Give suppliers appropriate training, such as 6S, APQP, PPAP, OEE, QC Tools 7. Develop supplier with poor performance by lean, VA/VE, etc.8. Solid knowledge of sand casting, forging, die casting, plastic injection, stamping, plating and coating9. Project experience of ball stud, control arm, gasket, wiper, etcAchievement1. Control main supplier’s PPM&OTD to meet the quality objective2. Make two F-M plants just like nothing happens3. Improve supplier’s ability of internal management by training4. Keep good relationship with suppliers, let them improve quality continuously5. Negotiate with supplier to solve advanced problem including quality, commerce and procedure change
工作經歷4
公司：浙江煜輝陽光能源有限公司時間：2012-04 至 2013-05
職位：高級供應商質量經理
職責：工作描述:1. 建立集團的SQE組織架構2. 修訂集團供應商質量管理手冊3. 整理完整有管理意義的合格供應商清單4. 負責供應商的資質評估、現場審核和業績考核5. 對供應商的能力進行開發，如質量體系、現場管理、成本降低等6. 對供應商的質量問題進行解決跟蹤7. 對集團分公司的質量人員進行培訓8. 影響並推動公司內部解決問題的思路和方法9. 提供供應商績效的專業分析報告主要業績:1. 建立有供應商管理體系2. 建立新的SQE團隊，並使其逐步專業化3. 對公司內外部分析和解決問題的方法有良性推動Job Responsibility:1. Set up group SQE organizational structure 2. Revise group manual of supplier quality management 3. Clear up Approved Supplier List with management sense4. Conduct supplier's qualification, site audit and performance evaluation 5. Develop supplier's internal ability on quality system, site management, cost-down etc6. Problem solving and tracking on headache issues7. Train quality staff from all sub-companies of group8. Influence and push forward methodology of problem solving9. Provide professional analytical report of supplier performanceAchievement:1. Set up approved supplier list with management sense2. Set up new SQE team with professional ability3. Push forward methodology of problem solving positively
工作經歷5
公司：濱特爾流體控制（北京）有限公司上海分公司時間：2013-08 至 2016-06
職位：高級先期質量主管
職責：工作描述:1. 為日常工作開發必要的工作模版，為先期質量和工藝建立知識庫2. 為新項目制定APQP計畫，並協調不同部門的團隊成員3. 運用QFD和普格矩陣，把VOC融入設計4. 領導技術評審，推進DFX的設計最佳化5. 在整個項目中運用FMEA和關鍵參數管理，進行風險評估6. 完成過程流程圖、PFMEA、控制計畫和工藝檔案7. 為了項目管理改進，組織“經驗教訓”的會議8. 為原型機和試生產尋找新供應商和採購零件9. 運用VA/VE和本地化項目推動成本降低10. 依據TS16949和ISO14001對供應商進行審核和資質評審11. 對供應商進行質量工具（APQP, PPAP, FMFE, MSA, SPC）、PPAP和工藝方面的培訓12. 通過初始過程能力分析和防錯驗證，來提高供應商質量績效13. 通過精益生產和六西格瑪項目進行持續改進14. 跟蹤並關閉供應商的整改行動主要業績:1. 在工程部門導入QFD、DFX、VA/VE和APQP等方法2. 最佳化工作流程和標準化工作模板3. 通過成為複合型人才和提高工作效率的手法，降低部門的運行成本Job Responsibility:1. Develop necessary working templates for routine work and establish knowledge tank for advanced quality and manufacturing.2. Make APQP plan and coordinate team members among different departments for new projects3. Integrate VOC into design by tools of QFD and pugh matrix4. Lead technical review and push forward DFX for design optimization5. Initiate risk assessment during the entire project by tools like FMEA and critical parameter management6. Complete process flow diagram, PFMEA, control plan and process documents7. Organize meeting of lessons learned for project management improvement8. Sourcing parts for prototype and pre-launch9. Drive cost saving activities by VA/VE and localization project10. Conduct supplier audit and qualification regarding TS16949 & ISO1400111. Train supplier on the quality tools (APQP, PPAP, FMFE, MSA, SPC), PPAP and manufacturing philosophies, etc. 12. Promote supplier quality performance by conducting initial process capability study and error proofing verification13. Execute continuous improvement by lean manufacturing and six sigma program14. Follow up and close corrective actions of suppliersAchievement:1. Introduce methodologies within engineering department, such as QFD, DFX, VA/VE, APQP, etc.2. Optimize working process and standardize working template3. Reduce cost by being versatile talent and improving working efficiency
工作經歷6
公司：浙江凱名瑞汽車部件有限公司時間：2016-06 至 至今
職位：執行副總經理
職責：工作描述:1. 負責設定公司的整體運營目標。2. 負責新產品開發的整個過程。3. 負責技術、生產、質量和行政等部門的協調運營。4. 負責把內部管理系統建立在有效運營數據的基礎上。主要業績:1. 把員工和公司管理層引上相互信任的軌道。2. 建立公司的技術工藝和生產管理上的差異化競爭優勢。3. 提高新產品開發一次合格率、成品及時交付率和一次合格率。
教育經歷1
學校：同濟大學&Southern Cross University時間：1999-10 至 2002-04
專業：MBA
學歷：碩士
教育經歷2
學校：上海大學時間：1994-09 至 1998-07
專業：工業自動化
學歷：本科
