主要學歷及工作經歷
主要學歷
1956年7月畢業於原大連工學院機械系
1980年12月至1982年12月赴英國曼徹斯特理工學院機械系進修
工作經歷：
1956,7至今 大連理工大學機械系任教
1992－1997 中國東北CAD培訓中心主任
1989－1997 中國微電子技術套用開發培訓中心主任
1982－1989 大連理工大學機械系工具機教研室副主任
研究領域
早年從事過工具機基礎理論和數控系統的研究，70年代後期開始從事CAD/CAE/CAM技術的研究,並逐步擴展到高新技術改造傳統產業和CIMS等諸多領域。先後主持和參與了包括國家五年計畫、國家自然科學基金、國家863工程CIMS推廣套用、國家CAD套用工程、機械工業部和航天航空工業部重點攻關、香港RGC、香港大學CRCG、以及企業委託開發在內的20多個項目，如有限元分析及其前後處理、模態分析、參數識別、最佳化設計、圖形庫與資料庫、特徵造型、計算機圖形學、機械零件圖和裝配圖智慧型化CAD、模具CAD/CAM、滾動軸承CAD/CAM、耐酸泵成組CAD、並行設計、高新技術改造傳統產業、產品報價系統、公理設計、3維CAD模型重建、多相完美材料零件設計與製造、虛擬樣機和虛擬製造、基於基因工程的產品創新理論與方法等。
碩博士生研究方向
多相完美材料零件的設計與製造、虛擬樣機和虛擬製造、基於基因工程的產品創新理論與方法、以及CAD/CAM等
出版著作和論文
中文出版著作
1. 金屬切削工具機設計，全國高校試用教材，1960，機械工業出版社，主要作者
2. 工具機設計手冊第七篇第三章：“工具機傳動系統設計”，1986，機械工業出版社，主編
3. 微電子技術在改造傳統產業中的套用， 1989,2，大連理工大學出版社，主編
4. 微電子技術改造傳統產業概論， 1990,6，大連理工大學出版社，主編
5. CAD/CAM一體化技術概論， 1992， 大連理工大學出版社，主編
6. CAD/CAM技術概論──全國CAD套用工程培訓網路通用教材，1994， 機械工業出版社，主編
7. 電子技術改造傳統產業概論，現代工業企業自動化叢書，清華大學出版社，1996，8，主編
8. 機械製造裝備設計，機械工業出版社，1999，主編，由“機械製造及自動化”教學指導委員會委託編寫的“九五”全國普通高等教育機電類規劃教材，獲教育部2002年普通高等學校優秀教材二等獎。
9. 機械製造裝備設計，機械工業出版社，2005，主編，“十五”國家級規劃教材
發表論文
1."A gene-engineering-based design method for the innovation of manufactured products”, Journal of Engineering Design, 2009; 20(2): 175-193.
2.“Developing a manufacturing technology for the components made of a multiphase perfect material”, International Journal of Advanced Manufacturing Technology, accepted in January 2008.
3. “Behavior modeling of laser micromachining in hybrid layered manufacturing for components made of a material with a periodic microstructure”, International Journal of Advanced Manufacturing Technology, 2008; 38: 85-92.
4.“Material database for the material design of components made of a multiphase perfect material”, Materials & Design, 2008; 29(6): 1131-1144.
5.“Virtual Manufacturing to Design a manufacturing technology”, Computer-Aided Design and Applications, 2008; 5 (1-4):110-120.
6.“Material selection using an improved Genetic Algorithm for material design of components made of a multiphase material”, Materials & Design, 2008; 29(5): 972-981.
7.“A simulation model for the fabrication of components made from multiphase perfect materials”, Robotics and Computer-integrated Manufacturing, 2008; 24(4): 514-523.
8.“An effective evaluation method of material affinity between adjacent material regions of a component for component design”, Materials & Design, 2008; 29(1): 146-153.
9.“Virtual Manufacturing to Design a manufacturing technology for Components Made of a Multiphase Perfect Material”, Proceedings of CAD-08, Orlando, U.S.A., June 2008, No.21.
10.“Modeling of plasma spraying process to manufacture hybrid materials”, Computer-Aided Design, 2007; 39(12):1120-1133.
11.“A virtual manufacturing system for components made of a multiphase perfect material”, Computer-Aided Design, 2007; 39(2): 112-124.
12.“Engraving behaviour modelling for manufacturing components with a periodic microstructure”, Proceedings of International Conference on Manufacturing Automation (ICMA2007), Singapore, May 28-30, 2007, pp. 493-500.
13.“Gene-engineering-based innovation and reverse deduction of virtual chromosomes of manufacturing products”, Advances in Design, Springer, London, 2006, pp.133-144.
14.“Visualized CAD models of objects made of a multiphase perfect material”, Advances in Engineering Software, 2006; 37(1): 20-31.
15.“Behavior modeling for the spraying device in the layered manufacturing process for the components made of a multiphase perfect material”, Journal for New Generation Sciences, 2006; 4(1): 8-20.
16.“Modeling of virtually manufactured components with a multiphase perfect material”, Proceedings of 2006 IEEE International Conference on Virtual environments, human-computer interfaces and measurement systems, La Coruna, Spain, July 2006, pp.160-165.
17.“Reverse deduction of virtual chromosomes of manufactured products for their gene-engineering-based innovative design”, Computer-Aided Design, 2005; 37(11): 1191-1203.
18.“Development of a CAD modeling system for components made of multi-heterogeneous materials”, Materials & Design, 2005; 26(2): 113-126.
19.“Design and modelling methods for the components made of multi heterogeneous materials in high-tech applications”, Volume 2 Information Technology, Intelligent knowledge-based systems: Business and Technology of the New Millennium, Kluwer Academic Publishers, 2005, pp.177-223.
20.“Holo-extraction and intelligent recognition of digital curves scanned from paper drawings”, Computer Aided Intelligent Recognition Techniques and Applications, John Wiley, New York, 2005, pp.363-388.
21.“A new design method for components made of a multiphase perfect material”, Proceedings of the 3rd International Conference of Manufacturing Research, Cranfield University, U.K., 2005, No.B3-6.
22.“Optimization of the spraying process for multiphase perfect materials by means of virtual manufacturing”, Proceedings of the 3rd International Conference of Manufacturing Research, Cranfield University, U.K., 2005, No.C3-6.
23.“Prediction of viscoelastic property of layered materials”, International Journal of Solids and Structures, 2004; 41: 3675-3688.
24.“Virtual genes of manufacturing products and their reforms for product innovative design”, Journal of Mechanical Engineering Science, Proceedings of the Institution of Mechanical Engineers Part C, 2004; 218: 557-574.
25.“CAD modeling for the components made of heterogeneous materials and smart materials”, Computer-Aided Design, 2004; 36(1): 51-63.
26.“Optimization of material properties needed for material design of components made of multi heterogeneous materials”, Materials and Design, 2004; 25(5): 369-378.
27.“Behavior modeling for the spraying device in the layered manufacturing process for the components made of a multiphase perfect material”, Proceedings of the 5th Annual International Conference on Rapid Product Development, Bloemfontein, South Africa, November 2-4, 2004, No.35.
28.“Study on CAD modeling for objects with a multiphase perfect material”, Proceedings of International Conference on Manufacturing Automation (ICMA 2004), Wuhan, China, October 26-29, 2004, pp.133-142.
29.“Material design for components made of multi material and its applications in high-tech product design”, Proceedings of International Conference on Manufacturing Automation (ICMA 2004), Wuhan, China, October 26-29, 2004, pp.167-174.
30.“Study on hybrid layered manufacturing technologies for components made of a multiphase perfect material”, Proceedings of International Conference on Manufacturing Automation (ICMA 2004), Wuhan, China, October 26-29, 2004, pp.755-764.
31.“Converting a CAD model into a manufacturing model for the component made of a multiphase perfect material”, Proceedings of the 15th Solid Freeform Fabrication Symposium, Austin, USA, August 2-4, 2004, pp.532-543.
32.“Novel implementation of plasma spraying for fabricating the component made of a multiphase perfect material”, Proceedings of the 15th Solid Freeform Fabrication Symposium, Austin, USA, August 2-4, 2004, 293-303.
33.“Generating layered manufacturing information for components made of multiphase perfect materials from their CAD models”, Proceedings of CAD’04, Pattaya Beach, Thailand, May 24-28, 2004, pp. Hot_mod_02.
34.“Gene-engineering-based innovation and reverse deduction of virtual chromosomes of manufacturing products”, Proceedings of the CIRP Design Conference, Cairo, Egypt, May 16-18, 2004, pp.7A_2_43.
35.“Developing a manufacturing technology for components made of multi heterogeneous materials”, Proceedings of the 3rdInternational Conference on Advanced Manufacturing Technology (ICAMT2004), Kuala Lumpur, Malaysia, May 11-13, 2004, pp. 259-265.
36.“Methodology and technology of design for cost (DFC) ”, The 5th World Congress on Intelligent Control and Automation, (WCICA'04)June 14-18, 2004, Hangzhou, China
37.“Developing the methods of modeling multi heterogeneous components”, Integrated Manufacturing Systems, 2003; 14 (7):586-592.
38.“Solid model reconstruction from engineering paper drawing using genetic algorithms”, Computer-Aided Design, 2003; 35 (13): 1235-1248.
39.“Computer-aided design method for the components made of heterogeneous materials”. Computer-Aided Design, 2003; 35(5): 453-466.
40.“Recognition of digital curves scanned from paper drawings using Genetic Algorithms”. Pattern Recognition. 2003; 36(1): 123-130.
41.“Development of computer-aided quotation system for manufacturing enterprises using Axiomatic Design”. International Journal of Production Research. 2003; 41(1): 171-191.
42.“A framework of the gene-engineering-based design theory and methodology for product innovation”. Proceedings of 14th International Conference on Engineering Design, Stockholm, Sweden, August, 2003, No.1093.
43.“A CAD modelling system for the components made of multi heterogeneous materials”, Proceedings of the 9th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA’2003), Lisbon, Portugal, September, 2003, Vol. I, pp.1235-1248.
44.“Holo-extraction of information from paper drawings for 3D reconstruction”, Computer-Aided Design, 2002; 34(9): 665-677.
45.“Intelligent approaches for generating assembly drawing from 3D computer models”, Computers-aided Design, 2002; 34(5): 347-355.
46.“Intelligent location dimensioning of cylindrical surfaces in mechanical parts”. Computer-Aided Design. 2002; 34(3): 185-194
47.“Computer Aided Quotation System for Modular Machine Tools and Production Lines”. Proceedings of International Manufacturing Leaders Forum, Adelaide, Australia, February, 2002, pp.10-17.
48.“Application of multiple domain feature mapping in Design For Cost(DFC) ”, CE2002, Cranfield University, U.K. July, 27-31, 2002.
49. “Exploring a genetics-based design theory and methodology for innovating products”. Proceedings of the 6th International Conference on Engineering Design and Automation, Maui, Hawaii, U.S.A., August, 2002, pp.278-283.
50.“Exploring a genetic-based design theory and methodology for innovating products”, Proceedings of the 6th International Conference on Engineering Design and Automation, Maui, Hawaii, U.S.A., August, 2002, pp278-283
51.“Heterogeneous materials with a periodic microstructure and their applications in engineering design”. Proceedings of the 6th International Conference on Engineering Design and Automation, Maui, Hawaii, U.S.A. August, 2002, pp.284-289
52.“A modeling method of heterogeneous components”. Proceedings of International Conference on Manufacturing Automation, Hong Kong, December 10-12, 2002, pp.65-72.
53.“Intelligent dimensioning for mechanical parts based on feature extraction”, Computer-Aided Design, 2001; 33(13): 949-965.
54.“Computer-Aided Quotation System for the Combined Cold Storage”, Proceedings of the 5th International Conference on Engineering Design and Automation, Las Vegas， Nevada, U.S.A. August, 2001，pp942-949
55.“Towards design method for heterogeneous component”, Proceedings of the 13th International Conference on Engineering Design, Glasgow, Scotland, U.K., August, 2001, pp.445-452.
56.“Computer Aided Quotation System for the Combined Cold Storage”. Proceedings of the 5th International Conference on Engineering Design and Automation, Las Vegas, Nevada, U.S.A. August, 2001, pp.942-949.
57.“Distributed networked research center and its application”, International conference on Commerce Engineering: New Challenges for Global Manufacturing in the 21st Century, Sept.16-18, 2001，Xian, Shanxi, China
58.“Development of integrated design for disassembly and recycling in concurrent engineering”, Integrated Manufacturing System, 2001; 12(1): pp67-79
59.“A framework of design for life-cycle cost”, Proceedings of the 4th International Conference on Engineering Design and Automation, Orlando, Florida, U.S.A., July, 2000, pp.916-923.
60.“Process integration of determining product prices for distributed enterprises”, Proceedings of the 4th International Conference on Engineering Design and Automation, Orlando, Florida, U.S.A., July, 2000, pp.907-915.
61.“Development of design for both assembly and disassembly using axiomatic design”. Proceedings of the 4th International Conference on Engineering Design and Automation, Orlando, Florida, U.S.A., July, 2000, pp.898-906.
62.基於公理設計理論的DFC成本估算軟體框架，計算機集成製造系統，2001，7(10):pp69-72
63.面向成本的設計中的多域特徵映射研究[J]. 機械科學與技術，2002,21(2): 318～324
64.面向成本的設計中的成本構成及其估算框架的研究，中國機械工程，2001,12(5)：pp510-514
65.基於公理設計理論的DFC成本估算軟體框架研究，計算機集成製造系統（CIMS），2001,7(10):pp69～72.
66.面向並行工程的DFC與DTC辨析，機械科學與技術，2000，19(4)：pp645-647
67.基於公理設計理論的現代設計方法集成研究，計算機集成製造（CIMS）2000,6(3)：pp75-79約束網路及約束傳播技術在並行設計中的套用研究，中國機械工程，2000，11(7)：pp787-791
68.分散式網路化研究中心及其在敏捷製造中的套用，製造業設計技術，1999，11
69.製造產品智慧型集成報價系統研究，組合工具機與自動化加工技術，1999，12
70.面向成本的設計的關鍵技術及其概念模型，大連理工大學學報，1999，39(6)：pp775-780
71.面向成本的設計的技術構成及其發展策略，製造業設計技術，1999,11:64～67
72.虛擬製造體系及其關鍵技術，計算機輔助設計與製造，1999年第10期
73.現代集成製造系統的技術構成及發展策略研究，組合工具機與自動化加工技術，1999，10
74.軸承工裝管理系統的設計與實現，組合工具機與自動化加工技術，1999,7
75.組合式冷庫工程設計及報價系統開發與研究，機械設計與製造，1999年第6期
76.分散式網路化研究中心及其在敏捷製造中的套用，1999，第5期，機械與電子
77.並行工程的研究概況綜述，機械製造，1999，3：pp9-11
78.我國虛擬製造技術發展策略淺析，機械設計與研究，1999，第1期
79.分散式網路化研究中心及其體系結構，計算機輔助設計與製造，1998，12
80.虛擬製造技術研究概況綜述，機械製造，1998，12
81.我國虛擬製造技術發展策略淺析，機械設計與研究，1999(1)：12～14
82.發展我國的虛擬製造技術，全國第一屆虛擬製造技術研討與演示會論文集，機械科學研究院，1998，9
83.虛擬製造系統技術支持及其體系結構分析，全國第一屆虛擬製造技術演示與研討會，1998，9，北京
84.集成製造系統中BOM功能套用，計算機輔助設計與製造，98年第5期
85.合理化工程綜述，機械科學與技術，1998，4
86.CIMS環境下基於特徵的產品建模，機械科學與技術，1998.1
87.集成環境下產品報價設計的實現，機械研究與套用，1998.3
88.PDM技術套用分析，計算機輔助設計與製造，1997，10
89.高新技術改造傳統產業，全國先進生產模式與製造哲理研討會論文集，1997，9
90.參數化零件圖庫開發新方法，北京航天航空大學學報，1997，4
91.電氣原理圖線號計算機自動標註方法的研究，大連理工大學學報，第三期，1995
92.機械零件形狀特徵表示方法探討，計算機輔助設計與製造，第一 期，1995
93.機械零件實體模型的工程表示，1994，計算機套用與軟體
94.基於構造基面的掃描體素構造方法，1994，小型微型計算機系統1994年第3期
95.迴轉體類機械零件特徵造型系統，1994，計算機輔助工程第六期
96.迴轉體類機械零件特徵造型，1993，第五屆全國CAD/CAM學術會議論文集
97.三維形體階梯剖切算法的設計與實現，1992，全國第7屆CAD/CG學術會議論文集
98.機械零件微機幾何造型系統──MPGMS，1992，計算機在機械工業中的套用國際會議論文集
99.鑽削類組合工具機夾具CAD圖形庫技術，1992，組合工具機與加工自動化技術第12期
100.微電子技術綜合改造傳統產業的基本模式，1990,5，機械工程第3期
101.在微機上實現工具機大件有限元靜、動態分析的研究，1989,3，機械強度第2期
102.用二維拼裝方法實現機械裝配圖CAD的技術策略，1994，大連理工大學學報1994年第3期
103.對多面體造型中一種快速拼合運算探討，1994年，計算機輔助設計與圖形學學報94年第1期
104.一個迴轉體類機械零件特徵造型系統──HZTCAD，1993，大連理工大學學報1993年第6期
105.一個工程視圖的消隱算法，1992，11, 大連理工大學學報第6期
106.Intelligent CAD for Box-type Machine Component，1992,8，42屆CIRP 年會論文，法國
107.鑽削類組合工具機夾具互動式CAD系統，1992,5，大連理工大學學報第3期
108.Interactive CAD System for the Fixture of Drilling Modular Machine Tools，1991,9，”Advances Computer Science in Application to Machinery”, Proceedings of the International Conference on CAD of Machinery
109.試論微電子技術改造傳統產業，1991,7，大連理工大學學報，第3期
110.微電子技術綜合改造傳統產業的基本模式，機械工程，1990，No.3
111.塑膠模具標準模架圖形庫，1989,11， 模具工業第6期
112.在微機上實現工具機大件有限元靜、動態分析的研究，機械強度，1989，No.2
113.塑膠模具標準模架圖形庫，模具工業，1989，6
114.Development and Research of FEM Preprocessor for Mechanical Structures, ICPE'88, Beijing, 1988,9
115.變截面軸振型曲線的擬合，機械振動與噪聲測試技術，1987，2
116.Intelligent CAD of Shaft, Sleeves and Cylindrical Gears by means of Personal Computer, 1987,8, CIRP Assembly in Yugoslavia
117.通用工具機主軸箱計算機輔助設計，大連工學院學報，1987，3
118.零件工作圖中尺寸標註的智慧型化，大連工學院學報，1987，4
119.軸、套、齒輪類零件微型計算機輔助設計，大連工學院學報，1988，2
120.臥式多軸自動車床上的主動測量儀，工具機，1987，5
121.微型機在工具機結構模態分析方面的套用，吉林工業大學學報，1988，3
122.機器結構參數識別，1985，1，大連工學院學報
123.局部有約束阻尼的空間平板組合結構的有限元動力計算，1984，4，大連工學院學報
124.用子空間疊代的有限元法計算工具機大件的振動，1979，2，大連工學院學報
125.雙公用齒輪最佳化設計，1979，3，大連工學院學報
126.組合工具機多軸箱軸孔坐標的電子計算機計算方法，1978，2，大連工學院學報
英文著作
61. Interactive CAD System for the Fixture of Drilling Modular Machine Tools，1991,9，"Advances Computer Science in Application to Machinery",Proceedings of the International Conference on CAD of Machinery
62. Intelligent CAD for Box-type Machine Component，1992,8，42屆CIRP 年會論文，法國
63. Development of design for both assembly and disassembly using axiomatic design,Proceedings of the 4th International Conference on Engineering Design and Automation,Orlando,Florida,U.S.A. July,2000，pp898-906
64. Process integration of determining product prices for distributed enterprises,Proceedings of the 4th International Conference on Engineering Design and Automation,Orlando,Florida,U.S.A. July,2000，pp907-915
65. A framework of design for life-cycle cost,Proceedings of the 4th International Conference on Engineering Design and Automation,Orlando,Florida,U.S.A. July,2000，pp916-923
66. Intelligent Dimensioning for Mechanical Parts Based on Feature Extraction,Computer-Aided Design,2001; 33⒀： pp949-965
67. Distributed networked research centre and its application，International conference on eCommerce Engineering: New Challenges for Global Manufacturing in the 21st Century,Sept.16-18,2001. Xi’an,Shanxi,P.R. China（論文編號：RID03-54）（機械工業出版社）
68. Development of integrated design for disassembly and recycling in concurrent engineering,Integrated Manufacturing System,2001; 12⑴： pp67-79
69.Development and Research of FEM Preprocessor for Mechanical Structures,ICPE'88,Beijing,1988,9
70. Intelligent approaches for generating assembly drawings from 3D computer models,Computer-Aided Design,2002; 34⑸： pp347-355
71. Intelligent location dimensioning of cylindrical surfaces in mechanical parts，Computer-Aided Design,2002; 34 ⑶： pp185-194
72. Towards design method for heterogeneous components,Proceedings of the 13th international conference on engineering design，Glasgow,Scotland,U.K.,August,2001,pp445-452
73. Computer-Aided Quotation System for the Combined Cold Storage,Proceedings of the 5th International Conference on Engineering Design and Automation,Las Vegas， Nevada,U.S.A. August,2001，pp942-949
74. Holo-extraction of information from paper drawings for 3D reconstruction,Computer-Aided Design，2002; 34⑼：pp665-677
75. Computer aided design for components made of heterogeneous materials，Computer-Aided Design，Accepted for publication on January 30,2002
76. Intelligent CAD of Shaft,Sleeves and Cylindrical Gears by means of Personal Computer,1987,8,CIRP Assembly in Yugoslavia
77. Distributed networked research center and its application,International conference on Commerce Engineering: New Challenges for Global Manufacturing in the 21st Century,Sept.16-18,2001，Xian,Shanxi,China
78. Computer aided quotation system for modular machine tools and production lines,Proceedings of International Manufacturing Leaders Forum,Adelaide,Australia,February,2002,pp10-17
79. Application of multiple domain feature mapping in Design For Cost(DFC),CE2002,Cranfield University,U.K. July,27-31,2002.
80. Exploring a genetic-based design theory and methodology for innovating products,Proceedings of the 6th International Conference on Engineering Design and Automation,Maui,Hawaii,U.S.A.,August,2002,pp278-283
81. Heterogeneous materials with a periodic microstructure and their applications in engineering design. Proceedings of the 6th International Conference on Engineering Design and Automation,Maui,Hawaii,U.S.A. August,2002,pp.284-289
82. A modeling method of heterogeneous component,Proceedings of International Conference on Manufacturing Automation,Hong Kong,December10-12,2002,pp.65-72.
83. Development of computer-aided quotation system for manufacturing enterprises using Axiomatic Design,International Journal of Production Research,2003; 41⑴： pp171-191
84. Recognition of digital curves scanned from paper drawings using Genetic Algorithms. Pattern Recognition. 2003; 36⑴： pp123-130
85. Computer-aided design method for the components made of heterogeneous materials. Computer-Aided Design,2003; 35⑸： pp453-466
86. A CAD modelling system for the components made of multi heterogeneous materials,Proceedings of the 9th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA’2003），Lisbon,Portugal,September,2003,Vol. I,pp.1235-1248.
87. A framework of the gene-engineering-based design theory and methodology for product innovation. Proceedings of 14th International Conference on Engineering Design,Stockholm,Sweden,August,2003,pp1093
88. Solid model reconstruction from engineering paper drawing using genetic algorithms,Computer-Aided Design,2003; 35 ⒀： pp1235-1248
89. Developing the methods of modeling multi heterogeneous components,Integrated Manufacturing Systems,2003;14 ⑺，：pp586-592.
90. Optimization of material properties needed for material design of components made of multi heterogeneous materials,Materials and Design,2004；25⑸，pp369-378
91. Reverse deduction of virtual chromosomes of manufactured products for their gene-engineering-based innovative design,Computer-Aided Design,accepted in July 2004.
92. Development of a CAD modeling system for components made of multi-heterogeneous materials,Materials & Design,2005; 26⑵： 113-126.
93. Prediction of viscoelastic property of layered materials,International Journal of Solids and Structures,2004; 41: 3675-3688.
94. Virtual genes of manufacturing products and their reforms for product innovative design,Journal of Mechanical Engineering Science,Proceedings of the Institution of Mechanical Engineers Part C,2004; 218: 557-574.
95. CAD modeling for the components made of heterogeneous materials and smart materials,Computer-Aided Design,2004; 36⑴： 51-63.
96. Holo-extraction and intelligent recognition of digital curves scanned from paper drawings,Computer Aided Intelligent Recognition Techniques and Applications,John Wiley,New York,2005.
97. Design and modelling methods for the components made of multi heterogeneous materials in high-tech applications,Business and Technology of the New Millenium,Kluwer Academic Publishers,2004.
98. Behavior modeling for the spraying device in the layered manufacturing process for the components made of a multiphase perfect material,Proceedings of the 5th Annual International Conference on Rapid Product Development,Bloemfontein South Africa,November 2-4,2004.
99. Study on CAD modeling for objects with a multiphase perfect material,International Conference on Manufacturing Automation (ICMA 2004），Wuhan,China,October 26-29,2004,pp.133-142.
100. Material design for components made of multi material and its applications in high-tech product design,International Conference on Manufacturing Automation (ICMA 2004），Wuhan,China,October 26-29,2004,pp.167-174.
101. Study on hybrid layered manufacturing technologies for components made of a multiphase perfect material,International Conference on Manufacturing Automation (ICMA 2004），Wuhan,China,October 26-29,2004,pp.755-764.
102. Converting a CAD model into a manufacturing model for the component made of a multiphase perfect material,Solid Freeform Fabrication Symposium,August 2-4,2004,pp.532-543.
103. Novel implementation of plasma spraying for fabricating the component made of a multiphase perfect material,Solid Freeform Fabrication Symposium,August 2-4,2004,293-303.
104. Generating layered manufacturing information for components made of multiphase perfect materials from their CAD models,Proceedings of CAD’04,May 24-28,2004,Thailand,pp. Hot_mod_02.
105. Gene-engineering-based innovation and reverse deduction of virtual chromosomes of manufacturing products,Proceedings of the CIRP Design Conference,Cairo,Egypt,May 16-18,2004,pp.7A_2_43.
106. Developing a manufacturing technology for components made of multi heterogeneous materials,Proceedings of 3rd International Conference on Advanced Manufacturing Technology (ICAMT2004），Kuala Lumpur,Malaysia,May 11-13,2004,pp. 259-265.
科研成果及所受獎勵
大連冷凍機股份有限公司CIMS工程
1998年12月通過了遼寧省科學技術委員會進行技術鑑定，被評為為國內領先
複雜電控系統CAD系統
國家“八五”重點科技攻關項目，1996年通過了機電部組織鑑定，被評為國內領先。
電子技術改造傳統產業示範工程
國家計委和機械電子部重點支持項目，目的是探索高新技術改造中國傳統產業的基本思路，開發和推廣高新技術改造傳統產業的相關技術和產品。1994年通過了機械部和經貿委組織驗收，授予試點廠大連冷凍機廠“全國機電一體化示範企業”稱號。
鑽削類組合工具機夾具CAD
國家“七五”重點科技攻關項目，1991年通過了機電部組織的鑑定，被評為在解決機械裝配圖設計方面具有較大的特色。獲1991機電部科技進步一等獎、國家科技攻關榮譽證書
箱體和叉架類零件CAD
國家“七五”重點科技攻關項目，獲1991機電部科技進步三等獎，國家科技攻關集體和個人榮譽證書，遼寧省科技進步三等獎
