人物介紹
學習經歷
2003年-2006年：法國梅斯大學(Université Paul Verlaine-Metz)力學博士。
2002年-2003年：法國勃艮第大學(Université de Bourgogne)工學碩士。
2001年-2003年：法國汽車與交通學院（Institut Supérieur de l’Automobile et des Transports）工程師學位。
2000年-2003年：武漢理工大學工學碩士。
1996年-2000年：武漢理工大學工學學士。
任職經歷
2007年12月至今：武漢大學土木建築工程學院副教授。
2009年6月至9月：法國梅斯大學訪問學者。
2008年6月至9月：盧森堡HENRI TUDOR研究中心訪問學者。
2006至2007年：法國巴黎綜合理工 (Ecole Polytechnique) 博士後。
2005年：法國梅斯大學助教。
2004至2005年：法國國立高等工藝工程師學校（Ecole Nationale Supérieure d'Arts et Métiers, ENSAM）助教。
主講課程
本科生課程
彈性力學及有限元
結構分析程式設計
研究生課程
結構分析程式設計
複合材料力學
研究領域
薄膜結構失穩現象研究
多尺度建模與仿真
複合材料結構計算
科研項目
1.主持國家自然科學基金面上項目1項、青年基金1項。
2.主持“中法蔡元培項目”1項。
3.主持湖北省國際合作（中法）項目1項。
4.主持湖北省自然科學基金重點項目1項。
5.合作主持盧森堡國家科學基金國際交流項目3項。
6.主持教育部留學回國科研啟動基金1項。
7.作為中方負責人參與盧森堡國家科學基金核心項目1項。
所獲榮譽
2011年獲湖北省第十三屆自然科學優秀學術論文二等獎。
2011受聘武漢大學珞珈青年學者。
2006年獲得教育部頒發的“國家優秀自費留學生獎學金”。
學術兼職
中國力學學會第八屆固體力學專業委員會斷裂與疲勞專業組成員
湖北省力學學會理事
湖北省複合材料學會理事
論文著作
1.Yang, J., Huang, Q., Hu, H.*, Giunta, G., Belouettar, S., Potier-Ferry, M., 2015. A new family of finite elements for wrinkling analysis of thin films on compliant substrates. Composite Structures 119, 568-577.
2.Huang, Q., Hu, H.* , Kun Yu, Potier-Ferry, M., Belouettar, S., Damil, N., 2015. Macroscopic simulation of membrane wrinkling for various loading cases. International Journal of Solids and Structures 64-65, 246-258.
3.Yu, K., Hu, H.*, Tang, H., Giunta, G., Potier-Ferry, M., Belouettar, S., 2015. A novel two-dimensional finite element to study the instability phenomena of sandwich plates. Computer Methods in Applied Mechanics and Engineering 283, 1117-1137.
4.Attipou, K., Hu, H., Mohri, F., Potier-Ferry, M., Belouettar, S., 2015. Thermal wrinkling of thin membranes using a Fourier-related double scale approach. Thin-Walled Structures 94, 532-544.
5.Sun, X.-Y., Hu, H., Cao, C., Xu, Y.-J., 2015. Anisotropic vacancy-defect-induced fracture strength loss of graphene. RSC Advances 5, 13623-13627.
6.Xu, F., Potier-Ferry, M., Belouettar, S., Hu, H., 2014. Multiple bifurcations in wrinkling analysis of thin films on compliant substrates. International Journal of Non-Linear Mechanics, doi: 10.1016/j.ijnonlinmec.2014.12.006.
7.Xu, F., Hu, H., Belouettar, S., Potier-Ferry, M., 2014. Bridging techniques in a multi-scale modeling of pattern formation. International Journal of Solids and Structures 50, 3119-3134.
8.Damil, N., Potier-Ferry, M., Hu, H.,2013. New nonlinear multi-scale models for wrinkled membranes. Comptes Rendus Mecanique 341, 616-624.
9.Giunta, G., Koutsawa, Y., Belouettar, S., Hu, H., 2013. Analysis of nano-plates by atomistic-refined models accounting for surface free energy effect. Acta Mechanica 224, 1-21.
10.Giunta, G., Koutsawa, Y., Belouettar, S., Hu, H., 2013. Static, free vibration and stability analysis of three-dimensional nano-beams by atomistic refined models accounting for surface free energy effect. International Journal of Solids and Structures 50, 1460-1472 .
11.Yu, K., Hu, H.*, Chen S., Belouettar, S., Potier-Ferry, M., 2013. Multi-scale techniques to analyz instabilities in sandwich structures. Composite S tructures 96, 751-762.
12.Mikdam, A., Belouettar, R., Fiorelli, D., Hu, H., Makradi, A., 2013. A tool for design of heterogeneous materials with desired physical properties using statistical continuum theory. Materials Science and Engineering: A 564, 493-500.
13.Liu, Y., Yu, K., Hu, H.*, Belouettar, S., Potier-Ferry, M., Damil, N., 2012. A new Fourier-related double-scale analysis on instability phenomena of sandwich structures. International Journal of Solids and Structures 49, 3077-3088.
14.Mhada, K., Braikat, B., Hu, H.,Damil, N., Potier-Ferry, M., 2012. About macroscopic models of instability pattern formation. International Journal of Solids and Structures 49, 2978-2989.
15.Biscani, F., Giunta, G., Belouettar, S., Carrera, E., Hu, H., 2012. Variable kinematic plate elements coupled via Arlequin method. International Journal for Numerical Methods in Engineering 91, 1264-1290.
16.Nasser H., Kiefer-Kamal, E.-H., Hu, H., Belouettar, S., Barkanov, E., 2012. Active vibration damping of composite structures using a nonlinear fuzzy controller, Composite Structures 94, 1385-1390.
17. Hu, H.,Damil, N., Potier-Ferry, M., 2011. A bridging technique to analyze the influence of boundary conditions on instability patterns. Journal of Computational Physics 230, 3753-3764, 2011.
18.He, Q. Z., Hu, H.*, Belouettar, S., Giunta, G., Yu, K., Liu, Y., Carrera, E., Potier-Ferry, M., 2011. Multi-scale modelling of sandwich structures using hierarchical kinematics. Composite Structures 93, 2375-2383.
19. Hu, H., Belouettar, S., Potier-Ferry, M., Makradi, A., Koutsawa, Y., 2011. Assessment of various kinematic models for instability analysis of sandwich beams. Engineering Structures 33, 572-579.
20.Biscani, F., Giunta, G., Belouettar, S., Carrera, E., Hu, H., 2011. Variable kinematic beam elements coupled via Arlequin method. Composite Structures 93, 697-708.
21. Hu, H., Belouettar, S., Potier-Ferry, M., Daya, E. M., Makradi, A., 2010. Multi-scale nonlinear modelling of sandwich structures using the Arlequin method. Composite Structures 92, 515-522.
22. Hu, H., Belouettar, S., Potier-Ferry, M., Daya, E. M., Makradi, A., 2009. A novel finite element for local and global buckling analysis of sandwich structures. Composite Structures 90, 270-278.
23. Hu, H., Belouettar, S., Potier-Ferry, M., Daya, E. M., Makradi, A., 2009. Multi-scale modelling of sandwich structures using the Arlequin method -Part I: linear modelling. Finite Element in Analysis and Design 45, 37-51.
24. Hu, H., Belouettar, S., Potier-Ferry, M., Daya, E. M., 2008. Review and assessment of various theories for modeling sandwich structures. Composite Structures 84, 282-292.
25. Hu, H., Belouettar, S., Daya, E. M., Potier-Ferry, M., 2006. Evaluation of kinematic formulations for viscoelastically sandwich beam modelling. Journal of Sandwich Structures and Materials 8: 477-495.
