工作經歷：
2015.7 - 至今， 大連理工大學機械工程學院，博導
2014.9 - 至今， 大連理工大學機械工程學院，教授
2012.8 - 2014.8，英國紐卡斯爾大學，研究助理
2012.7 - 2012.8，韓國東亞大學機械工學系，助理教授
2011.3 - 2012.7，韓國東亞大學機械工學系，講師
2010.9 - 2011.3，韓國東亞大學高性能閥門技術中心，研究員
2004.8 - 2005.8，中國北車集團大連電力牽引研發中心，工程師
教育經歷：
2010，韓國東亞大學，機械工學，博士
2007，韓國東亞大學，機械工學，碩士
2004，大連理工大學，機械工程，學士
社會兼職
1. 國際SCI期刊IET Power Electronics，副編輯
2. 國際期刊Global Journal of Technology and Optimization，編委
3. 國際SCI期刊Electric Power Components and Systems，客座編輯
4. 2015年安全閥和控制閥國際研討會，比利時馮.卡門流體力學研究所，指導委員
5. 2015年第八屆智慧型機器人與套用國際會議（ICIRA2015），英國朴茨茅斯，分會場主席
6. 2015年第十四屆國際壓力容器技術會議(ICPVT-14)，上海，分會場主席
7. 第九屆套用計算機和套用計算科學國際會議 （ACACOS’10），杭州，分會場主席
8. 2008年動力控制和最佳化國際會議（PCO2008），泰國清邁，分會場主席
9. IEEE會員
10. 以下國際期刊和會議論文審稿人
Advances in Mechanical Engineering，Journal of Mechanical Engineering Research，Advances in Materials Science and Applications，Journal of Fluid Engineering (ASME transactions)，Proceedings of the Institution of Mechanical Engineers, Part C，Proceedings of the Institution of Mechanical Engineers, Part D，Journal of Profess Mechanical Engineering，Scientia Iranica Journal，Energy Conversion and Management，Journal of Convergence Information Technology，Basic Research Journal of Engineering Innovation，Global Journal of Technology and Optimization，IET Power Electronics，Nuclear Science and Techniques，International Journal of Electrical Power and Energy Systems，International Journal of Chemical Reactor Engineering，ASME和IEEE國際會議等
研究領域
1. 結構與多學科最佳化設計
2. 複雜裝備系統建模與分析
3. 不確定性分析與可靠性
4. 結構損傷評估與壽命預測
5. 特種泵閥數值分析與設計
主持的項目：
[1]. 2016-2018, 核電彈簧式安全閥的多尺度流固耦合建模及其動態不穩定性研究, 國家自然科學基金
[2]. 2015-2018, 基於CAE仿真的先進裝備高效可靠性最佳化設計方法, 遼寧省自然科學基金
[3]. 2014-2016, 安全閥動特性的數值模擬和實驗研究, 中央高校基本科研業務費專項項目
[4]. 2013, 直升機功率模組散熱設計, 企業諮詢項目(英國Denis Ferranti集團)
[5]. 2012, 車載發電機組件的抗風沙性模擬評估, 企業諮詢項目(韓國石門電氣公司)
參與的項目：
[1]. 2013-2017, 硬岩掘進裝備的關鍵基礎問題, 國家973計畫項目子課題
碩博研究方向
1. 結構與多學科最佳化設計
2. 複雜裝備系統建模與分析
3. 不確定性分析與可靠性
4. 結構損傷評估與壽命預測
5. 特種泵閥數值分析與設計
出版著作和論文
截止2015年9月，已發表學術論文60餘篇。其中，EI論文40多篇，SCI論文30多篇，論文最高影響因子6.008,影響因子大於3.0的論文6篇，1篇論文2015初被評為ESI高被引用論文，英文書章1節，中文專著1本。Google scholar統計，文章總被引用300餘次，H因子為10。
一. 部分期刊論文（*通訊）:
[27] B Ji, Xueguan Song*, E Sciberras, W Cao, V Pickert, Multiobjective Design Optimization of IGBT Power Modules Considering Power Cycling and Thermal Cycling；IEEE TRANSACTIONS ON POWER ELECTRONICS；30 (5), 2015, 2493 - 2504
[26] B Ji, Xueguan Song*, W Cao, V Pickert, Y Hu, JW Mackersie, G Pierce, In Situ Diagnostics and Prognostics of Solder Fatigue in IGBT Modules for Electric Vehicle Drives;IEEE TRANSACTIONS ON POWER ELECTRONICS;30 (3),2015, 1535-1543
[25] L Xing, PK Das, Xueguan Song*, M Mamlouk, K Scott, Numerical analysis of the optimum membrane/ionomer water content of PEMFCs: The interaction of Nafion@ ionomer content and cathode relative humidity;APPLIED ENERGY;138, 2015, 242-257
[24] Xueguan Song*, L Cui, M Cao, W Cao, Y Park, WM Dempster, A CFD analysis of the dynamics of a direct-operated safety relief valve mounted on a pressure vessel;ENERGY CONVERSION AND MANAGEMENT;81, 2014, 407-419
[23] X. Song, W. Shin, W. Cao, M. Cao, S. Kang, Y. Park*, Numerical investigation of a liquid-gas ejector used for shipping ballast water treatment, Mathematical Problems in Engineering, 2014, In press
[22] Z. Tan, X. Song, W. Cao*, Z. Liu, B. Zahawi, Site-matching DFIG machine rewinding design based on surrogate optimization algorithm, IEEE Transactions on Energy Conversion, 2015, In press
[21] Maosen Cao, Xueguan Song, Wei Xu, Zhongqing Su, Weidong Zhu, Performance Assessment of Natural Frequencies in Characterizing Cracks in Beams in Noisy Conditions, Journal of Vibroengineering, In press
[20] Song XG*, Zhang J, Kang SH, Ma MY, Ji B, Cao WP, Pickert V, Surrogate-based analysis and optimization for the design of heat sinks with jet impingement, IEEE Transactions on Components, Packaging and Manufacturing Technology. DOI:10.1109/TCPMT.2013.2285812, 2013
[19] Sun GY, Song XG*, Baek SH, Li Q. Robust optimization of foam-filled thin-walled structure based on sequential Kriging metamodels, Structural and Multidisciplinary Optimization , DOI: 10.1007/s00158-013-1017-3, 2013
[18] Xing L, Song X*, Scott K, Pickert V, Cao W. Multi-variable optimisation of PEMFC cathodes based on surrogate modelling, International journal of Hydrogen Energy, Vol. 38, no. 33, 2013, pp.14295-14313
[17] Yihua Hu, Bin Gao*, Xueguan Song, Guiyun Tian, Kongjing Li, Xiangning He, Photovoltaic fault detection using a parameter based model, Solar Energy, Vol. 96, August 2013, pp. 96–102
[16] Xue-Guan Song, Young-Chul Park and Joon-Hong Park*, Blowdown Prediction of Conventional Pressure Relief Valve with Simplified Dynamic Model, Mathematical and Computer Modelling, Vol. 57, 1-2, January 2013, pp. 279-288
[15] Xue-Guan Song, Joon-Hong Park, Seung-Gyu Kim, Young-Chul Park*, Performance Comparison And Erosion Prediction Of Jet Pumps By Using Numerical Method, Mathematical And Computer Modelling, Vol. 57, 1-2, January 2013, pp. 245-253
[14] Song Xueguan, Sun Guangyong*, et al., Crashworthiness Optimization of Foam-filled Tapered Thin-walled Structure using Multiple Surrogate Models, Structural and Multidisciplinary Optimization, Volume 47, Issue 2, February 2013, pp. 221-231
[13] Xueguan Song, Youngchul Park*, A study on the use of multiple surrogate models in valve design, Advanced Science Letters, Vol. 14, Number 1, July 2012 , pp. 175-180(6)
[12] Joon Hong Park, Seung Gyu Kim; Young Chul Park, Xueguan Song*, Shape Design of the Deep-Drawing Preform for Manufacturing of Automobile Drum Clutch Hubs, Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, vol. 226, April 2012, pp. 1016-1024
[11] Xue Guan Song, Lin Wang, Young Chul Park*, Transient analysis of a spring loaded pressure safety valve using CFD, Journal of Pressure Vessel Technology, Vol. 132, October 2010, pp. 054505(1)-(5)
[10] X.G. Song, Ji Hoon Jung, et al., Metamodel-based optimization of a control arm considering strength and durability performance, Computers and Mathematics with Applications (2010), Vol 60, Issue 4, August 2010, pp. 976-980
[9] Jian Li, Xueguan Song, Dawoon Choi, Yunhyun Cho*, Research on Influence of Stator Shapes and Frames of Switched Reluctance Motor to Thermal Characteristics, International Journal of Applied Electromagnetics and Mechanics, Vol 32, 2010, pp. 1-8
[8] L Wang, X G Song, Y C Park*, Dynamic analysis of three-dimensional flow in the opening process of a single-disc butterfly valve, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 224, 2010, pp. 329-336
[7] Xue-Guan SONG, Lin WANG, Young-Chul PARK*, Analysis and optimization of nitrile butadiene rubber sealing mechanism of ball valve, Transactions of Nonferrous Metals Society of China, Vol. 19, 2009, pp. 220-224
[6] Xue-Guan SONG, Seung-Gyu KIM, Seok-Heum BAEK, Young-Chul PARK*, Structural optimization for ball valve made of CF8M stainless steel, Transactions of Nonferrous Metals Society of China, Vol. 19, 2009, pp. 258-261
[5] XUE GUAN SONG; LIN WANG ; SEOK HEUM BAEK; YOUNG CHUL PARK*, Multidisciplinary optimization of a butterfly valve, ISA Transactions, Vol. 48, 2009, pp. 370-377
[4] Song, Xueguan; Wang, Lin; Park, Youngchul*, Fluid and Structural Analysis of A Large Diameter Butterfly Valve, Journal of Advanced Manufacturing Systems, Vol. 8, 2009, pp. 81-88
[3] X G Song, L Wang, Y C Park*, Analysis and optimization of a butterfly valve disc, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Vol. 223, 2009, pp. 81-89
[2] Li, Jian; Song, Xueguan; Cho, Yunhyun*, Comparison of 12/8 and 6/4 Switched Reluctance Motor: Noise and Vibration Aspects, IEEE Transactions on Magnetics, Vol. 44, 2008, pp. 4131-4134
[1] Xueguan Song, Jung-Ho Kang, Seung-Gyu Kim, Young-Chul Park*, Prediction of Flow Coefficient According to Accuracy of Opening Bellows Seal Valve, Journal of the Korean Society of Manufacturing Process Engineers, Vol. 6, No. 4, pp. 3-7
二. 部分國際會議論文（*通訊）:
[12] Bing Ji, Xueguan Song*, Wenping Cao, Volker Pickert, Temperature Control for Lithium-Ion Batteries in Electric Vehicles, The Fourth Hybrid and Electric Vehicles conference, 6- 7 November 2013, London, UK
[11] SeungGul Baek, XueGuan Song, YoungChul Park, TaeGual Kim, KyoungYong Park, KwangSun Kim, Study on the Flange Manufacturing of Pipe With High Pressures, In ASME 2012 International Mechanical Engineering Congress and Exposition, pp. 211-216, 2012, USA
[10] Sanghoon Kang, Xueguan Song, Kyunghun Kim, and Youngchul Park, Investigation on a Gas-Liquid Ejector Using Three-Dimensional CFD Modeling, In ASME 2012 International Mechanical Engineering Congress and Exposition, pp. 2399-2406, 2012, USA
[9] Xueguan Song, Youngchul Park*, Jian Li, Joonho Lee, Optimization of Switched Reluctance Motor for Efficiency Improvement using Response Surface Model and Kriging Model, The Fourth International Joint Conference on Computational Sciences and Optimization (CSO 2011), 15-19 April 2011, Yunnan, China
[8] Xue-Guan Song，Lei Cui, Young-Chul Park*, Three-Dimensional CFD analysis of a spring-loaded pressure safety valve From opening to re-closure, ASME 2010 Pressure Vessels & Piping Division / K-PVP Conference, July 18-22, 2010, Bellevue, Washington, USA
[7] Joon-Ho Lee, Xue-Guan Song, San-Mo Kan, Young-Chul Park*, Optimization of Flow Coefficient for Pan Check Valve by Fluid Dynamic Analysis, International Conference On Power Control And Optimization 2010
[6] X. G. Song, L. Wang, S. Kim, Y. Park*, Transient Flow Analysis of Spring Loaded Pressure Safety Valve, 2009 Pressure Vessels & Piping Conference, July 26-30, 2009, Prague, Czech Republic
[5] Xue Guan Song, Kwon Hee Lee, Lin Wang, Seung Gyu Kim, Joon Hong Park, Young Chul Park*，A Study on the use of multiple surrogate models in valve design，The 8th World Congress on Structural and Multidisciplinary Optimization, June 1 - 5, 2009, Lisbon, Portugal
[4] Young Chul Park , Joon Hong Park, Seung Gyu Kim, Xue Guan Song, etc., Preform optimization for manufacturing of automobile drum clutch hub and its experimental verification, The 8th World Congress on Structural and Multidisciplinary Optimization， June 1 - 5, 2009, Lisbon, Portugal
[3] Li J., Song X.G., Choi D., Cho Y.H*, Research on reduction of vibration and acoustic noise in switched reluctance motors, In Advanced Electromechanical Motion Systems & Electric Drives Joint Symposium, 2009. ELECTROMOTION 2009. 8th International Symposium on (pp. 1-6). IEEE.
[2] Xue Guan Song, Han Seok Park, Kwon Hee Lee, Young Chul Park*, Application of Response Surface Model and Kriging Model to ADI Lower Control Arm Optimization, 2009 International Joint Conference on Computational Sciences and Optimization, Sanya, Hainan, China, April 24-April 26
[1] Xueguan Song, Youngchul Park*, Numerical Analysis of Butterfly Valve-Prediction of Flow Coefficient and Hydrodynamic Torque Coefficient, The World Congress on Engineering and Computer Science 2007, 24-26 October, 2007, San Francisco, USA
三. 書章和專著（*通訊）:
[1].宋學官、蔡林、張華， ANSYS流固耦合分析與工程實例, 中國水利水電出版社,2012
[2]. Park Youngchul and Song Xueguan*, Numerical analysis of large diameter butterfly valve", Advances in Computational Algorithms and Data Analysis (Chapter 24), Springer Netherlands, 2009
工作成果
1. 2013, 第九屆國際直線電機驅動與工業套用會議(LDIA 2013), 中國杭州, 最佳論文獎
2. 2011, 第四屆計算科學與最佳化國際大會(CSO 2011), 中國麗江, 最佳張貼海報獎
3. 2010, 第四屆動力控制和最佳化國際會議(PCO 2010), 馬來西亞, 最佳張貼海報獎
4. 2010, ASME壓力容器與管道國際會議(ASME PVP 2010), 美國西雅圖, 博士論文競賽榮譽獎
5. 2009, 國家留學基金委, 中國國家優秀自費留學生獎學金
6. 2007.9 - 2010.8, 韓國BK21獎學金
