韓嘯：男，大連理工大學 工程力學系 講師 碩士研究生導師
工作經歷：
2015.01 - 至今 大連理工大學 工程力學系 講師 碩士研究生導師
教育經歷：
2011.09 - 2014.10 大連理工大學 汽車工程學院 車輛工程專業 博士
2012.09 - 2013.09 英國薩里大學 機械工程系 機械工程專業 公派聯合培養
2009.09 - 2011.07 大連理工大學 工程力學系 工程力學專業 碩士
2005.09 - 2009.07 大連理工大學 工程力學系 工程力學專業 本科
社會兼職
International Journal of Adhesion and Adhesives, The Journal of Adhesion, Composites: Part B, Theoretical and Applied Fracture Mechanics和固體力學學報等學術期刊審稿人。
Society for Adhesion and Adhesives會員
研究領域（研究課題）
1. 複合材料輕量化連線方法工藝和力學性能測試；
2. 輕量化接頭多場耦合環境老化行為試驗設計和力學建模；
3. 異種材料接頭載入破壞過程斷裂力學建模和膠層裂紋擴展數值模擬。
主持的科研項目：
1. 中國博士後科學基金面上資助項目，異種材料膠鉚接頭多場耦合環境耐久性試驗和建模研究，2015-2017.
2. 遼寧省教育廳科學研究一般項目，異質材料結構膠接接頭基本力學性能及其環境耐久性研究，2015-2017.
3. 中央高校基本科研業務費專項資金資助，結構膠接接頭的環境退化行為研究，2015-2016.
碩博研究方向
招收碩士研究生專業：
1. 工程力學
2. 製造工藝力學
學術期刊：
X Han, AD Crocombe*, SNR Anwar, et al. The strength prediction of adhesive single lap joints exposed to long term loading in a hostile environment[J]. International Journal of Adhesion and Adhesives, 2014,55:1-11.
X Han, AD Crocombe*, SNR Anwar, et al. The effect of a hot–wet environment on adhesively bonded joints under a sustained load[J]. The Journal of Adhesion, 2014,90(5-6):420-436.
P Hu, X Han, LFM da Silva, et al. Strength prediction of adhesively bonded joints under cyclic thermal loading using a cohesive zone model[J]. International Journal of Adhesion and Adhesives, 2013,41:6-15.
P Hu, X Han, WD Li*, et al. Research on the static strength performance of adhesive single lap joints subjected to extreme temperature environment for automotive industry[J]. International Journal of Adhesion and Adhesives, 2013,41:119-126.
WD Li, M Ma, X Han*, et al. Strength prediction of adhesively bonded single lap joints under salt spray environment using a cohesive zone model[J]. The Journal of Adhesion, 2015.
WD Li, P Bo, X Han*, et al. Predicting the strength of adhesively bonded t-joints under cyclic temperature using a cohesive zone model[J]. The Journal of Adhesion, 2015.
P Hu, Q Shao, WD Li*, X Han. Experimental and numerical analysis on load capacity and failure process of T-joint effect produced by the bond-line length[J]. International Journal of Adhesion & Adhesives, 2012,38:17-24.
P Hu, ZW Shi, XX Wang, WD Li, SG Zhou, X Han. Strength degradation of adhesively bonded single-lap joints in cyclic-temperature environment using a cohesive zone model[J]. The Journal of Adhesion, 2015,91(8):587-603.
胡平, 韓嘯, 李偉東等. 考慮汽車車身塗裝工藝影響的非平衡膠接接頭強度[J]. 機械工程學報, 2012(48), 93-102.
韓嘯, 李偉東, 胡平. 非平衡膠接接頭循環溫度場強度退化研究[J]. 機械工程學報, 2012(48), 97-103.
X Han, WB Hou, P Hu. A simulation study on stiffness of thin-walled beam structure for automobile body[J]. Chinese Journal of Automotive Design, 2011,12:8-13.
學術會議：
X Han, AD Crocombe*, P Hu, WD Li. Effect of hostile environment on adhesive single lap joints under constant loading[C]. 2nd International Conference on Structural Adhesive Bonding, Porto, Portugal, 2013.
SNR Anwar, X Han, AD Crocombe*, et al. The effect of sustained load on the environmental degradation of adhesively bonded joints[C]. 12th International Triennial Conference on the Science and Technology of Adhesion and Adhesives, York, UK, 2013.
X Han, WB Hou, P Hu. Theoretical and numerical analysis on material-stiffness characteristics for thin-walled beams on vehicles[C]. Proceedings of the ASME 2011 International Design Engineering Technical Conference, Washington DC, USA, 2011.
P Hu, X Han, L Li, Q Shao, WD Li. Effect of temperature on shear strength of adhesively bonded joints for automobile industry[C]. 2nd International Conference on Advances in Materials and Manufacturing, Guilin, China, 2011.
P Hu, X Han, WD Li. Research on the strength degradation of unbalanced adhesive joints subjected to extreme-temperature environment[C]. 2012 China Automobile Lightweight Technology Conference, Beijing, China, 2012.
X Han, WB Hou, ZJ Bi, P Hu*. Theoretical analysis and numerical simulation on characterization of the material stiffness in automobile body[C].7th China CAE Engineering Analysis Technology Annual Conference, Kunming, China, 2011.
工作成果（獎勵、專利等）
運載工程與力學學部 青年教師講課競賽 一等獎
博士研究生國家獎學金
錢令希力學獎學金 二等獎
