主要教育經歷
Ph.D. : INPT-ENSIGC (Institut National Polytechnique de Toulouse – Ecole Nationale Superieure d’Ingenieure de Genie Chimique, France), 1988
MS (D.E.A.): INPT-ENSIGC, 1986
B.Eng. : Chemical Engineering Department, Tianjin University (Tianjin, P. R. China), 1982.
講授課程
1、 化工過程分析與合成 （本科生）
2 、化工過程系統工程專題（碩士生）
3 、化工過程工程專題 （博士生）
研究領域
Mass transfer and separation engineering
Modelling and analysis of separation processes
Multi-phase computational fluid dynamics for chemical processes
Computational Mass transfer
Modelling and measurement of interfacial mass transfer of vapor-liquid two-phase flow for separation processes
Interfacial transport phenomena
Process Systems Engineering
Mixed-integer nonlinear programming for process systems optimization
Stochastic approaches for complex process optimization
Optimal design and scheduling of batch processes
Optimal sequencing and heat integration of distillation networks
Heat integrated and thermally coupled distillation system
主要學術成就、獎勵及榮譽
獲2005年國家科技進步二等獎（第7名）
2004年天津市科技進步一等獎（第7名）
2002年天津市自然科學一等獎（第2名）
國務院政府特殊津貼，(英) IChemE Fellow，天津市授銜專家
加入團體
中國化工學會理事
中國系統工程學會過程系統工程專業委員會委員
歐洲化學工程聯盟(EFChE)流體分離委員會委員
化學工程聯合國家重點實驗室學術委員會委員
中國石油和勘探設計協會化學工程設計專業委員會 副主任委員
(英) IChemE Fellow、註冊化學工程師
《Chinese Journal of Chemical Engineering》編委
《中國科技論文線上（化工卷）》編委
代表論文
1. 安維中, 袁希鋼*, 用於熱集成精餾序列綜合的改進模擬退火算法, 化工學報, 2005, 56(3) 506-510
2. 安維中, 袁希鋼*, 基於隨機最佳化的熱耦合複雜精餾系統的綜合（I）模型化方法，化工學報, 2006, 57(7) 1591-1598
3. 安維中, 袁希鋼* 基於隨機最佳化的熱耦合複雜精餾系統的綜合（II）計算舉例與分析，化工學報, 2006, 57(7) 1599-1604
4. 劉永建，袁希鋼*，羅禕青，基於模糊規劃的質量負荷不確定水網路的綜合，化工學報，2006， 57（4），867-873
5. 郭瑩，袁希鋼*，曾愛武，余國琮，基於濃度/速度場測量的吸收過程液相傳質係數，化工學報，2006，57（6），1277-1283
論著專利:
Peer refereed Journal Papers:
Zhang C., Yuan X., Luo Y., & Yu K. T., Prediction of species concentration distribution using a rigorous turbulent mass diffusivity model for bubble column reactor simulation part I: Application to chemisorption process of CO2into NaOH solution, Chemical EngineeringScience, 2018, 184,161-171.
Zhang C., Yuan X., Luo Y., & Yu K. T., Prediction of species concentrationdistribution using a rigorous turbulent mass diffusivity model for bubble columnreactor simulation Part II: Analogy between turbulent mass and momentumtransfer in toluene emissions biodegradation process, Chemical EngineeringScience, 2018, accepted.
S K Jia, X. Qian, X. G. Yuan, Optimal design for dividing wall column using support vector machine and particle swarm optimization, Chem Eng Research and Design, (2017) DOI:
Bing Dong, X.G. Yuan∗, K.T. Yu, Determination of liquid mass-transfer coefficientsfor the absorption of CO2in alkaline aqueoussolutions in structured packing using numerical simulations, Chem Eng Research and Design, 124 (2017) 238–251
S K Jia, C. Zhang, X.G. Yuan, K. T. Yu, An optimization approach to find the thermodynamic limit on convective mass transfer enhancement for a given viscous dissipation Chemical Engineering Science, 146(2) (2016), 26-34
Qian, Xing, Jia, Shengkun, Skogestad, Sigurd, Yuan, Xigang, Control structure selection for four-product Kaibel column, COMPUTERS & CHEMICAL ENGINEERING, 93: 372-381(2016)
Qian, Xing, Jia, Shengkun, Luo, Yiqing, Yuan, Xigang, Yu, Kuo-Tsong, Control of reactive dividing wall column for selective hydrogenation and separation of C3 stream, Chinese Journal of Chemical Engineering, 24(9):1213-1228 (2016)
Jia, Shengkun, Zhang, Chao, Yuan, Xigang, Yu, Kuo-Tsong, An optimization approach to find the thermodynamic limit on convective mass transfer enhancement for a given viscous dissipation, Chemical Engineering Science, 146: 26-34 (2016)
Z Liu, Y Luo, X Yuan, Simultaneous integration of water and energy in heat‐integrated water allocation networks, AIChE J , 2015 , 61 (7) :2202-2214
Wenbin Li, Kuotsung Yu, Xigang Yuan, Jesse Zhu, Botan Liu a, Yuanyuan Shao, An anisotropic Reynoldsmass flux model for the simulation of chemical reaction in gas-particle CFB risers, Chemical Engineering Science, 135(2015), 117–127
Wenbin Li, Kuotsung Yu, Xigang Yuan, Botan Liu, An anisotropic turbulent mass transfer model for simulation of pilot-scale and industrial-scale packed columns for chemical absorption, International Journal of Heat and Mass Transfer, 88 (2015) 775–789
Wenbin Li, Kuotsung Yu, Xigang Yuan, Botan Liu, A Reynolds mass flux model for gas separation process simulation: I. Modeling and validation Chinese Journal of Chemical Engineering 23 (2015) 1085–1094
Wei Chen, Shuyong Chen, Xigang Yuan, Huishu Zhang, Kuotsung Yu, Three-dimensional simulation of interfacial convection in CO2-ethanol system by hybrid lattice Boltzmann method with experimental validation, Chinese J. Chem. Eng. 2015, 23 (2): 356-365
Xuewu Jia, Weichao Hu, Xigang Yuan, Kuotsung Yu Effect of surfactant type on interfacial area and liquid mass transfer for CO2 absorption in a bubble column, Chinese Journal of Chemical Engineering, 23 (2015) 476–481
Xing Qian, Shengkun Jia, Yiqing Luo, Xigang Yuan∗, Kuo-Tsong Yu, Selective hydrogenation and separation of C3stream by thermally coupled reactive distillation, Chem. Eng. Res. Des., (2015) 99: 176–184
Xiaolong Ge, Chen Ao, Xigang Yuan, and Yiqing Luo, Investigation of the Effect of the Vapor Split Ratio Decision in Design on Operability for DWC by Numerical Simulation, Industrial & Engineering Chemistry Research, Ind. Eng. Chem. Res. 2014, 53, 13383−13390
Xiaolong Ge, Xigang Yuan∗, Chen Ao, Kuo-Ksong, Simulation based approach to optimal design of dividing wall columnusing random search method, Computers and Chemical Engineering, 68 (2014) 38–46
Mi Zhou, Xigang Yuan, Yahui Zhang, and K. T. Yu, Local Composition Based Maxwell−Stefan Diffusivity Model for Binary Liquid Systems, Ind. Eng. Chem. Res., 52, 10845−10852, (2013)
Lianghua Xu, Xigang Yuan,, Dawei Chen, Yiqing Luo, Kuotsong Yu, Reversibility analysis for design optimization of an internally heat-integrated distillation column, Chem. Eng. Tech., 36, 1-11 (2013)
Laleh Torab Maralani, YUAN Xigang, LUO Yiqing, GONG Chao and YU Guocong, Numerical Investigation on Effect of Vapor Split Ratio to Performance and Operability for Dividing Wall Column, Chinese J. Chem. Eng., 21(1) 72-78 (2013)
Dawei Chen, Xigang Yuan, Lianghua Xu, K. T. Yu, Comparison between Different Configurations of Internally and Externally Heat Integrated Distillation by Numerical Simulation, Ind. Eng. Chem. Res., 52, 5781−5790, (2013)
Bo Fu, Botan Liu, Xigang Yuan, Shuyong Chen, Kuotsung Yu, Modeling of Rayleigh convection in gas–liquid interfacial mass transfer using lattice Boltzmann method, Chem. Eng. Res. Des., 91(3), pp 437-447, 2013
S. Y. Chen, B. Fu, X. G. Yuan, H. S. Zhang, W. Chen, and K. T. Yu, Lattice Boltzmann Method for Simulation of Solutal Interfacial Convection in Gas−Liquid System, Ind. Eng. Chem. Res., 51(33), pp10955−10967, 2012
Fu B., X.G. Yuan, B.T. Liu, S.Y.Chen, H. S. Zhang, A.W. Zeng, K.T. Yu, Characterization of Rayleigh Convection in Interfacial Mass Transfer by Lattice Boltzmann Simulation and Experimental Verification, Chinese J Chem Eng, (2011), 19(5) 845-854
W. B. Li, B. T. Liu, K. T. Yu, and X. G. Yuan, Rigorous Model for the Simulation of Gas Adsorption and Its Verification, Ind. Eng. Chem. Res, 50 (13), pp 8361–8370, 2011
SUN Zhimin, LIU Chunjiang, YU Guocong (K. T. YU) and YUAN Xigang, Prediction of Distillation Column Performance by Computational Mass Transfer Method, Chinese J. Chem. Eng., 19(5) 833-844 (2011)
LI Wenbin, LIU Botan, YU Guocong and YUAN Xigang, A New Model for the Simulation of Distillation Column, Chinese J. Chem. Eng., 19(5) 717-725 (2011)
Luo Yiqing, Yuan Xigang and Dong Fenglian, Synthesis and heat integration of thermally coupled complex distillation system, Int. J. Energy Res. (2009)
Guo Biao Liu, K.T. Yu, X.G. Yuan, C.J. Liu, A numerical method for predicting the performance of a randomly packed distillation column, Int J. Heat and Mass Transfer 52, 5330–5338, (2009)
AnWei-zhong, Yuan Xi-Gang, A simulated annealing-based approach to the optimal synthesis of heat-integrated distillation sequences, Comp. Chem. Eng., (2009) 33 199–212
Yuan Xigang and Yu Guocong, PERSPECTIVES: Computational Mass Transfer Method for Chemical Process Simulation, Chinese J. Chem. Eng., 16(4) 497-502 (2008)
G. B. Liu, K. T. Yu, X. G. Yuan, and C. J. Liu, A Computational Transport Model for Wall-Cooled Catalytic Reactor, Ind. Eng. Chem. Res. 47, 2656-2665, 2008
Z. M. Sun, K. T. Yu, X. G. Yuan, C. J. Liu, A modified model of computational mass transfer for distillation column, Chem. Eng. Sci., 62 (2007) 1839-1850
Luo Yiqing, Yuan Xigang, Liu Yongjian, An improved PSO algorithm for solving non-convex NLP/MINLP problems with equality constraints, Comp. & Chem. Eng., 31 (2007) 153–162
Books:
K. T. Yu and X. G. Yuan, Introduction to Computational Mass Transfer – With application to Chemical Engineering, second edition, Springer Nature, Singapore Pte Ltd, 2017
K. T. Yu and X. G. Yuan, Computational Mass Transfer for Chemical Engineering, Chemical Industry Press, Beijing, 2016
K. T. Yu and X. G. Yuan, Introduction to Computational Mass Transfer – With application to Chemical Engineering, Springer, Verlag, Berlin, Hedelberg, 2014
K. T. Yu and X. G. Yuan, Elementary of Computational Mass Transfer for Chemical Engineering, Tianjin University press, Tianjin, 2011
Book chapters:
· Mixed-integer Nonlinear Programmming. In “Process Systems Engineering”, Ed. Pingjing Yao, ECUST press, Shanghai, 2009
· Batch process systems. “Process Systems Engineering”, Ed. Pingjing Yao, ECUST press, Shanghai, 2009
· Computational Mass Transfer. In “Perspective of 21st century’s chemical engineering”, Ed by J. H. Li, Y. Hu, Q. Yuan, Chemical Industry Press, Beijing, (2004).
· Batch Processes Desigen and scheduling. In “Batch Processes”, Ed by Z. C. Yang, Chemical Industry Press, Beijing, (1999).
合作交流:
Member of International Scientitic Committee, and session chair: 10th International Conference on Distillation & Absorption 2014, Friedrichshafen, Germeny
2014年中國過程系統工程年會，大會特邀報告, 學術委員會委員, 瀋陽，2014.8.21-22
Oral presentation on the Annual meeting of the EFCE FS Working Party 2013, Winterthur, Switzerland
Member of the Executive Scientific Committee of International conference on Process Systems Engineering Asia (PSE Asia 2013), 2013, Kuala Lumpur, Malaysia
Invited Keynote: 6th International Conference on Process Systems Engineering Asia (PSE Asia 2013), 2013, Kuala Lumpur, Malaysia
Invited presentation on The 13th International Symposium on Clean Technology and Green Energy,YeugnamUniversity, 12-15 September 2013
Session co-chair: the 7th International Conference on Separation Science and Technology (ICSST2013), 2013, Chengdu, China
2013年中國過程系統工程年會，大會特邀報告, 學術委員會委員, 銀川，2013.8.7-9
Invited presentation on Workshop on Energy Efficient Separation Systems at PSE 2012 (IEA-Annex 9 Energy Efficient Separation Systems) 2012, Singapore
中國石油和化工勘察設計協會化學工程設計專業委員會暨全國化工化學工程設計技術中心站2012年年會, 大會特邀報告, 學術委員會委員, 廈門, 2012
Oral presentation on the Annual meeting of the EFCE FS Working Party 2011, Oxford, England
2011年第四屆全國傳質與分離工程學術會議, 大會組委會主席, 學術委員會委員, 天津, 2011
